Manualshelf

User's Manual

ManualsBrandsRadwin ManualsElectronicsPoint to Point Broadband Radio System
11121314151617181920
WinLink1000 Installation and Operation Manual Chapter 1 Introduction
The rear panel of the IDU includes the connectors for power, WAN,
LAN, E1/T1, and the ODU. The wiring specifications are detailed in
Appendix A
. The rear panel LEDs are described in
Chapter 3
.
IDU-C
The IDU-C front panel includes four LEDs that display the status of
E1/T1and, wireless link, self-test results, and ODU-to-IDU link. For a
detailed description of the front panel LEDs, see
Chapter 3
.
ODU
ODU includes a power connector, which receives -48 VDC, and RJ-45
for Ethernet traffic from the IDU. The ODU is attached to a mast using a
special mounting kit, which is supplied with the unit.
The ODU can be used with an integrated antenna, as illustrated in
Figure
1-2
, or with an external antenna. If an external antenna is to be
used, then the ODU is supplied fitted with an N-type connector.
Physical Description 1-7