User's Manual

WinLink1000 Installation and Operation Manual Chapter 2 Installation and Setup
AC power should be supplied via a 1.5m (5 ft) standard power cable
terminated by a standard 3-prong socket. A cable is provided with the
unit.
Æ
To connect AC power to an IDU-E:
1. Connect the power cable socket to the power connector on the
WinLink1000 front panel.
2. Connect the power cable plug to the mains outlet.
The unit turns on automatically upon connection to the mains.
Æ
To connect DC power to an IDU-C and AIND
A special IEC 60320 adapter for-48 VDC power connection is supplied
with the unit.
2.10 Starting the WinLink1000 Manager Software
Æ
To start the WinLink1000 manager:
1. Connect the management station to the LAN.
2. Double-click the WinLink1000 Manager icon on the desktop, or
click Start > Programs > WinLink1000 Manager.
The Login dialog box appears.
Figure 2-5. Login Screen
3. Select the suitable option:
 Select Local Connection (Broadcast), if user is connected directly
to the IDU LAN port.
PM Starting the WinLink1000 Manager Software 2-9