User's Manual

Quick Start Guide WinLink 1000 Installation and Operation Manual

2 Installing WinLink 1000 Units

• Drill (for wall mounting only)

• IDU and ODU grounding cable

• 13 mm or 1/2″ socket spanner

• ODU to IDU cable if not ordered (Outdoor class, CAT-5e, 4 twisted

pairs)

• Cable ties

• Laptop running Windows 2000 or Windows XP

Before the installation

1. Install the WinLink 1000 software on the laptop.

2. Verify that all equipment and tools are available.

Performing Installation

To install the ODU:

1. At site A, route the ODU cable from the ODU location (on the roof) to

the IDU location (inside the building). The maximum length is 100m.

2. Mount the ODU unit to the mast or wall, using the mounting kit.

3. Connect the RJ-45 connectors to both ends of the cable, use the

pinout table and diagram below:

IDU RJ-45 Wire Color Function ODU RJ-45

1 White/Green Ethernet (RxN) 1

Twisted

2 Green Ethernet (RxT) 2

3 White/Orange Ethernet (TxT) 3

Twisted

4 Blue Power (+) 4

5 White\Blue Power (+) 5

Twisted

6 Orange Ethernet (TxN) 6

7 White/Brown

Power (−)

Twisted

8 Brown

Power (−)

4. Secure the ODU and ground cables to the mast or brackets using

cable ties.

5. Repeat the procedure at site B.