User's Manual

Chapter 4 Configuration WinLink1000 Installation and Operation Manual
• For WinLink1000 with the Automatic Channel Select feature see
WinLink1000 with Automatic Channel Select .
• For WinLink1000 5.4 GHz ETSI version see
WinLink1000 5.4 GHz
ETSI Version
.
WinLink1000 without Automatic Channel Select
You must select a pure frequency channel for data transmission. A
pure channel is a channel with no interference from existing systems in
the installation area. The pure channel is usually found during the site
survey stage before installing the system.
Figure 4-3. Installation Wizard, Channel Select dialog box
Æ
To select an available frequency channel:
1. The pull-down list shows the ISM frequencies available for the
WinLink1000 version that you have.
The Manual option at the end of the list allows you to enter a user-
defined channel within the system frequency band.
4-4 Selecting Channels