User's Manual

WinLink1000 Installation and Operation Manual Chapter 4 Configuration
Selecting a new channel causes the system quality to change. The
quality bar shows the adjustment until the system finds the best
quality link.
2. Click Next.
The Rate Select box appears.
WinLink1000 with Automatic Channel Select
Automatic Channel Select enables WinLink1000 to change frequency
channels automatically if interference is detected on the current
operating channel.
Figure 4-4. Channel Select dialog box - Automatic Channel Select
Æ
To define automatic channel selection:
1. Select the main frequency from the Operating Channel menu.
2. Select the required Bandwidth 5, 10, or 20 MHz.
3. Click the check box if Automatic Channel Selection is required.
Selecting Channels 4-5