Manualshelf

User's Manual Part 1

ManualsBrandsRadwin ManualsElectronicsOutdoor radio unit operating in the 2.5-2.7 GHz (BRS) band
131132133134135136137138139140
Hub Site Sync Chapter 8
RADWIN 2000 User Manual Release 2.5.40 8-4
To change the Transmit Power:
1. Choose a site to configure.
The Configuration dialog box opens.
2. Choose Air Interface (see Figure 8-3).
3. Choose the required Transmit (Tx) Power Level.
4. Click Apply to save the changes.
Figure 8-3: Changing the Transmit Power
For detailed explanation about the relationship between these parameters, see page 5-13 to
5-21.
Hub Site Sync
Here you can view the HSS status:
Caution
Changing the Tx Power will affect service quality. The same considerations
apply here as were noted in the Installation procedure on page 5-17.