Operating instructions

Introduction DMDVB20 LBST Satellite Modem
1-2 TM138 – Rev. 1.0
1.1 Features/Options Installed at Time of Order
The DMDVB20 LBST can be configured in the following different ways:
• features and options that are installed when the unit is ordered
• feature upgrades
• hardware options that are installed to a unit that is sent to a Radyne facility
• hardware options that the user can install at their own location
Features installed at the time of ordering are the options pre-installed/initialized in the factory prior
to shipment. These can be reviewed from the front panel system menu. Refer to Section 4, User
Interfaces for information on how to view these features.
Factory installed options are chassis and board configurations that are introduced during
manufacturing.
1.1.1 Feature Upgrades
Feature Upgrades are soft upgrades that can be easily be enabled on the modem. Enabling new
features are done remotely or through the front panel of the modem. Features may be purchased
at any time by contacting a Radyne Corp. salesperson. Refer to Section 4 and Appendix D, for
information on how upgrade features are enabled.
1.1.2 Radyne Installed Options
Units may also be sent to the Radyne Corp. facility for hardware option installation. Please
contact the Radyne Corp. Customer Service Department for information pertaining to availability
and to shipping costs.
1.1.3 Hardware Options
Hardware options (refer to Appendix A) are purchased parts that can be installed into the unit at
the customer’s site. A screwdriver is normally the only tool required. Please contact the Radyne
Corp. Customer Service Department for information pertaining to availability and to shipping
costs.
Only authorized service personnel should handle and install optional
hardware options.
1.2 Function Accessibility
All functions can be accessed through the front panel, terminal or personal computer via a serial
link or via the Ethernet port offering a complete remote monitoring and control capability.