User manual

NMS-4000
Network Management System
P/N 2349-72712-01 Page 2-33
Figure 2-27: Modulators Communication Settings Dialog
Table 2-19: Modulators Communication Settings Dialog Parameters
PARAMETER DESCRIPTION
Connect Using Selects the device COM port.
Bits per second Selects the baud rate of the serial communication.
Data bits Selects the data bits.
For Newtec Modulator, the data bits value is 7.
For other modulators, the data bits value is 8.
Parity Selects the parity.
For Newtec Modulator, the Parity value is Even.
For other modulators, the Parity value is None.
Stop Bits Selects the stop bits.
Modulator 0 Port Changes the first device port.
Backup [Device] Port Changes the backup port of the device.
Server IP Address Sets the IP address where the proxy is running.
Server Port
Server TCP Timeout This parameter default value is 4000millisecond and should
not be changed.