User manual

User Manual
Chapter 2. Installation
Page 2-40 P/N 2349-72712-01
c. Traps Port Number – This parameter should be equal to the system notification port.
The system notification port is defined from the Designer in the System Configuration tab
of the System dialog. Refer to paragraph 2.3.7 for more details.
d. Timeout and Retries – provides the following parameters:
• Tries Number - Changes the number of retries.
• Timeout - Changes the Timeout between Retransmits.
e. Multiple Network Card Support – ignore when using one network card support. Apply
the options below only when using external and internal network cards:
• Encoder\MUX FTP server IP – selects the internal network card
• Traps receiving IP address – selects the internal network card.
• Information exporting IP address – selects the external network card.
2.5.5.3. Dialog Commands
The dialog provides the following commands and operations:
• [OK] button – confirm the IP address list and closes the dialog.
• [Cancel] button – discard the changes and closes the dialog.