User's Manual

AreaRAE Plus & AreaRAE Pro User’s Guide
106
21 Specifications
Dimensions
12.6″ x 12.4x 6.3″ (322 mm x 315 mm x 160 mm) with boot
Weight
13.67 lbs (6.3 kg)
Gas Sensor Slots
7 total; see Sensor list on this page
Additional Sensors*
Gamma, RAEMet (wind speed, wind direction, temperature, humidity)
GPS
Installed at factory
Battery
Rechargeable 7.2V/10AH Li-ion battery pack with built-in charger
Alkaline adapter with 5 D-size batteries
Battery Charging Time
<10 hrs
Operating Hours
Approximately 16 hours with wireless connectivity, GPS, and all sensors
operational
Power input
AC adapter with Input 110-240 V AC
Display
Large 240x320 pixel LCD display
2.5x 3.34″ (63.59 mm x 84.79 mm)
Keypads
3 operation and programming keys
Alarms
High/Low limits for gases and radiation detectors, STEL, TWA limits for
EC sensors, low battery, sensor, or pump failure
Visible Alarm
Bright LED, 360-degree view
Audible Alarm
Dual buzzers: 108 dB @ 1 m
Data logging
Continuous datalogging (90 days for 12 gas sensors and GPS at 1-minute
intervals, continuously)
Data Storage
24M bytes (memory-full action: stop when full or wrap-around)
Data Interval
User-configurable from 1 to 3,600 sec
Wireless
Long Range: ISM License-free 900 to 928 MHz or 2.4GHz
Optional WiFi
Secondary: Mesh Network
FCC Compliance
FCC Part 15
Communication
Communicates to ProRAE Studio via USB cable to PC;
Wireless data and alarm status transmission via Wi-Fi or ISM modem;
Acts as gateway to connect up to 8 remote Mesh-module equipped
instruments
Safety Certification
Class I, Division 2 Groups A, B, C, D
ATEX Zone 2 (II 3G Ex nA [ic Gc] IIC T4 Gc)
IECEx (Ex n IIC T4 Gc)
Ex n IIC T4 Gc (China)
Sampling Pump
Built-in pump, typical flow rate 450 cc/min
Temperature
-20° C to 50° C (- F to 122° F)
Humidity
0% to 95% relative humidity (non-condensing)
Ingress Protection (IP)
IP-65 (third-party tested)