User's Manual

AreaRAE Plus & AreaRAE Pro User’s Guide
38
12.3 Menus And Submenus
In Programming Mode, menus and submenus are organized as shown here:
Measurement
Alarms
Datalog
Wireless
Monitor
Calibration
Sensor On/Off
Alarm Limits
Clear Datalog
Sel Primary
Radio
LCD Contrast
Fresh Air
Change Meas.
Gas
Alarm Mode
Datalog
Interval
GPS
Pump Speed
Multi Sensor
Span
Measurement
Unit
Alarm
Settings
Sensor
Selection
Mesh
Zero At Start
Single Sensor
Zero
Duplicated
Sensor
Comfort Beep
Data Selection
ISM
Fast Startup
Single Sensor
Span
Datalog Type
WiFi
Language
Multi Sensor
Bump
Memory Full
Action
Site ID
Single Sensor
Bump
User ID
Cal. Reference
Secure In
Place
Change Cal.
Gas
Multi Cal.
Select
Change Span
Value
12.3.1 Editing And Selecting Parameters And Sensors
There are a few basic ways to edit parameters, select sensors, and perform other activities in the
AreaRAE Plus/Pro. The actions performed by pressing keys always match 1-to-1 with the boxes
along the bottom of the display and the three keys. Some parameters are edited by scrolling and
selecting individual items (black bars behind white text act as highlighters). Some include a
choice via “radio buttons,” where only one item in a list can be selected, while other menus use
boxes for you to “check” with an “X,” and these allow for multiple items in a list to be selected.
In all cases of editing, you can save or undo your choice.