Dosimeter Reader User’s Guide Rev.
© Copyright 2013 RAE Systems, Inc.
Dosimeter Reader User’sGuide Contents 1 Read before Operating ........................................... 4 2 Warnings................................................................. 4 3 Regulatory Compliance .......................................... 4 4Dosimeter Reader Features ..................................... 7 5 General Information ............................................... 8 6 Operation .............................................................. 10 6.1 Powered on/off ....................
Dosimeter Reader User’sGuide 1Read before Operating This manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining, or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in accordance with the manufacturer’s instructions. 2Warnings For safety reasons, this equipment must be operated and serviced by qualified personnel only.
Dosimeter Reader User’sGuide 3 Regulatory Compliance FCC Part 15 Class A Equipment This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Dosimeter Reader User’sGuide can reasonably be expected to have the capability to access information in that form.
Dosimeter Reader User’sGuide 4 Dosimeter Reader Features 7
Dosimeter ReaderUser’sGuide 5General Information The Dosimeter Reader PRR-1 is a specially designed supporting electronic device for DoseRAE Pro dosimeters.It communicates with the dosimeters in pass-by and short range data exchanges in a wireless manner, forconfiguring, activating, and diagnosing the dosimeters via the PC-installedsoftware, ProRAE Dosimeter V2.00 or higher versions.
Dosimeter ReaderUser’sGuide Key Features · NFC (13.56MHz) contactless smart reader · Multi-functions in one, including configuration and diagnosis of DoseRAE Pro dosimeters · User and product identification or authentication · Three LED lights indicating whether the readeris powered on, ready for and currently in data communications, respectively · Power supply by PC via a USB cable · Compact size(140mm×100 mm×30mm, 5.5”×4.0”×1.2”) · Lightweight (120 g or 4.
Dosimeter ReaderUser’sGuide 6Operation When operating, the Dosimeter Reader PRR-1 links a DoseRAE Pro dosimeter andProRAE Dosimeter to enable the software to: · Read out and set parameters from and for the dosimeter · Upgrade firmware for the dosimeter · Identify user ID or instrument ID · Diagnose the dosimeter · Download data from the dosimeter · Clear or reset dose history for the dosimeter. 6.1 Powered on/off Dosimeter Reader PRR-1 is powered by a PC through a proper USB cable (e.g.
Dosimeter ReaderUser’sGuide marked, referring to the following image),the“Access” LED (green) is on, indicating that the reader has sensed,and built a connection with,the DoseRAE Pro dosimeter.
Dosimeter ReaderUser’sGuide 6.3 Relay data between DoseRAE Pro and ProRAE Dosimeter When there are data exchanges between the dosimeter and the software, the “Status” LED flashes in green frequently.
Dosimeter ReaderUser’sGuide 7. Specifications* Data Transmission Near Field Communication (NFC, 13.56MHz) Transmission Distance < 3cm Response Time Operation status Indicators < 3s Three LEDs: Power - the reader is powered on; Status - data exchanges between the DoseRAE Pro dosimeter and ProRAE Dosimeter software; Access - the reader has sensed and built a connection with the DoseRAE Pro dosimeter USB Communicati ons with PC Management Software ProRAE Dosimeter V2.
Dosimeter ReaderUser’sGuide Dimensions 140mm×100mm×30mm (5.5”×4.0”×1.2”) Weight Environmental 120g (4.2 oz) Operating Temperature: -20° to +50°C Storage Temperature: -30° to +85°C Humidity: < 95%RH (noncondensing) Certification FCC: Part 15 CE: EN 300 330-2 V1.5.1, EN 301489-1 V1.9.2 and EN 301 489-3 V1.4.1, the R&TTE Directive 1999/5/EC (Article 3.1b and 3.
Dosimeter ReaderUser’sGuide 8 Technical Support To contact RAE Systems Technical Support Team: Monday through Friday, 7:00AM to 5:00PM Pacific (US) Time Phone (toll-free): +1 888-723-4800 Phone: +1 408-952-8461 Email: tech@raesystems.
Dosimeter ReaderUser’sGuide 9 RAE Systems Contacts RAE Systems World Headquarters 3775 N. First St. San Jose, CA 95134-1708 USA Phone: +1 408.952.8200 Fax: +1 408.952.8480 E-mail: customerserv@raesystems.com Web Site: www.raesystems.com RAE Systems Europe ApS Kirstinehøj 23 A DK-2770 Kastrup Denmark Phone: +45 86 52 51 55 Fax: +45 86 52 51 77 orders@raeeurope.com sales@raeeurope.com service@raeeurope.com Web: www.raesystems.
Dosimeter ReaderUser’sGuide Mobile: +44 7841362693 Email: raeuk@raeeurope.com RAE Systems France 336, rue de la fée des eaux 69390 Vernaison France Phone: +33 4 78 46 16 65 Fax: +33 4 78 46 25 98 Email: info-france@raeeurope.com Web: www.raesystems.fr RAE BeNeLux BV Hoofdweg 34C 2908 LC Capelle a/d Ijssel Phone: +31 10 4426149 Fax: +31 10 4426148 Email: info@rae.nl Web: www.rae.nl RAE Systems Spain, s.l. Av.
Dosimeter ReaderUser’sGuide Email: mdelgado@raespain.com Web: www.raespain.com RAE Middle East LOB 7, Ground Floor, Office 19, Jebel Ali Free Zone Dubai, United Arab Emirates Phone: +971.4.887.5562 Email: mesales@raesystems.com RAE Systems (Hong Kong) Ltd. Room 8, 6/F, Hong Leong Plaza 33 Lok Yip Road Fanling, N.T, Hong Kong Phone: +852.2669.0828 Fax: +852.2669.0803 Email: hksales@raesystems.com Nihon RAE Systems Co., Ltd.
Dosimeter ReaderUser’sGuide Sang-Dong 412-2, Wonmi-Gu, Bucheon, Kyungki-Do, Korea Phone: 82-32-328-7123 Fax: 82-32-328-7127 Email: krsales@raesystems.
RAE Systems World Headquarters 3775 N. First St. San Jose, CA 95134-1708 USA Phone: 408.952.8200 Fax: 408.952.8480 Email:customerserv@raesystems.com Website:www.raesystems.com Rev.
