User's Manual

For Internal Use Only
STD 0x00 for RM900 if region is
BAND_868_EU.
0x01 to 0x0A total 10 channels
for RM900 if region is
BAND_915_NA.
0x0B to 0x1A total 16 channels
for RM2400 if region is
BAND_2400_ISM.
If channel number is not
compliance with radio region, do
not return response CMD.
Reset automatically.
RPT_LOCATION
Use on:
GTW
RTR
STD
Both 0x38 None 0x39 None Print node’s network information
in ASCII.
GET_APPTYPE
Use on:
GTW
RTR
STD
Both 0x3A None 0x3B AppType(1) Get application type.
AppType:
1 – GTW;
2 – RTR;
3 – Reserved;
4 – STD;
5 – Reserved;
other - invalid
SET_TX_POWER
Use on:
GTW
RTR
STD
Both 0x3C TxPwr(1
)
0x3D None Set modem transmission power
level.
For RAEMeshII
0xFF – maximum level,
0x80 – middle level,
0x00 – minimum level,
For RAEMesh
Power setting from 0xE3(-25dBm)
to 0xFF(0dBm).
Reset automatically.
LEAVE_NETWORK
Use on:
GTW
RTR
STD
Both 0x3E None 0x3F None Leave the current network.
RST_REASON
Use on:
GTW
RTR
STD
Both 0x40 None 0x41 Reason(1) Below just list RAEMeshII reset
reason,
0x00 = UNKNOW ,
0x01 = RESET_ EXTERNAL,
0x02 = RESET_ POWERON_,
0x03 = RESET_ WDT,
0x04 = RESET _BROWNOUT,
0x05 = RESET_JTAG,
0x06 = RESET _WARM,