User's Manual

For Internal Use Only
• Command Sets
Command Name
Effect
Area
CMD
Code
CMD
Data
(bytes)
Response
CMD Code
Response
CMD
Data(Bytes)
Description
NETWORK_STATU
S
Use on:
GTW
RTR
STD
Both 0x20 None 0x21 STATUS(1) Return the radio’s network status
0x00: NO NETWORK
0x02: JOINED NETWORK.
Host controller or instrument
should call it periodically with
certain duty cycle to check the
network status.
SEND_MSG_UNI
Use on:
GTW
RTR
STD
RM 0x26 DestNw
kID(2)
RCS
Pack(x)
0x27 None Send message in unicast mode.
NwkAddr: Network address
Message must in RCS format.
GET_MODULE_TY
PE
Use on:
GTW
RTR
STD
Both 0x2A None 0x2B Type(1) Return the radio’s type.
Type:
0: Bluetooth
1: coRE3-433MHz
2: coRE3-868MHz
3: coRE3-915MHz
4: ZcoRE3-2400
5: UART to Ethernet
6: UART to RS485
7: RM2420
8: RM900
9: Reserve
10: RM2400
11: coRE1-433MHz
12: coRE1-868MHz
13: coRE1-915MHz
14: coRE2-433MHz
15: coRE2-868MHz
16: coRE2-915MHz
17: coRE6-2.4GHz
GTW_ENABLE
Use on:
GTW
RTR
STD
Both 0x30 None 0x31 None Set the radio as a GTW so that
the radio can be use on a
Gateway device.
Baud rate change to 38400 8N1
Reset automatically.
RTR_ENABLE
Use on:
GTW
RTR
STD
Both 0x32 None 0x33 None Set radio to RTR. Always on and
has router function.
Baud rate change to 19200 8N1
Reset automatically.
CHG_RRCM_CHA
N
Use on:
GTW
RTR
Both 0x34 Channel
Number
(1)
0x35 None Requests change radio channel
to specified channel. Meanwhile,
specified channel should be
compliance with radio region
setting.