Users Manual

Product Instructions
Safety warning
In order to ensure the integrity and safety of the product, please follow the warnings and
reminders in this manual.
Be careful! Please read the safety precautions carefully:
1. During installation, try to avoid in the minefield, strong magnetic field and high pressure
area;
2. Ensure that the wiring is correct and firm, so as to avoid short circuit damaging
components and triggering fire accidents;
3. Please install the controller in a well ventilated place to ensure the appropriate ambient
temperature;
4. Please check whether the input power supply voltage of the controller meets the
product requirements, and whether the definition of the positive and negative poles of the
power supply is consistent with the product;
5. Live wiring is prohibited. After checking and confirming that the wiring is correct, check
that there is no short circuit in the power on;
6. If there is any problem, please do not repair it without permission.
If in doubt, please contact the supplier.
Product introduction
The 17 key magic light strip controller uses the advanced microcomputer control IC and
the most advanced PWM (pulse width modulation) control technology, which is used to
control various lamps and lanterns with LED as the light source. It can control most of the
three wire led magic lighting products on the market.
The 17 key magic light strip controller has 358 function mode selection, which can send
control commands through RF remote control within effective distance to control the
function change, speed adjustment, brightness adjustment, static color selection and
various dynamic light change effects of LED light belt.
The 17 key magic light strip controller has power down holding function. In case of
accidental power failure during use, the previous data (mode and speed) will be displayed
in the next startup.