Datasheet

Data Sheet

LUMOTAST 22 Emergency Stop Pushbutton

1.15.105.0xx/xxxx

Page 2 of 2 2013/01/03

Electrical Data according to IEC/EN 60947-5-1 (VDE 0660, Part 200)

Alternating current Direct current

Use category: AC15 DC13

Rating insulation voltage Ui: 250 V 250 V

Rating operation voltage Ue: 250 V 240 V

Therm. Steady current: 2.5 A 2.5 A

Technical Data

Mounting hole: 22.3 mm

Torque (assembly nut): max. 1.9 Nm

Release: Rotating release (left/right)

Mounting position: any position

Manual Soldering: leadfree soldering paste, temperature should not exceed 350°,

soldering time max. 5 sec.

Norms: EN 60947-5-1, EN 609475-5, EN 60068, EN 13850

Note

with integrated transmitter (2NC, 2NC + 1NO, 2NC illuminable with white LED)

- Switching position display

- acc. to EN 13850

Order numbers

LUMOTAST 22 Emergency Stop Pushbutton with 2NC 1.15.105.001/0000

LUMOTAST 22 Emergency Stop Pushbutton with 2NC, illuminable 1.15.105.011/0000

LUMOTAST 22 Emergency Stop Pushbutton with 2NC + 1NO 1.15.105.021/0000

3D data in ”.step” or “.igs” format upon request.

Technical data are approximate and intended solely for general orientation in the selection of a product. Subject to

modifications and errors. Images and other graphics may only be similar. For more information, refer to

www.rafi.de chapter Imprint /Data Protection.

RAFI GmbH & Co. KG

Ravensburger Str. 128-134, D-88276 Berg/Ravensburg

Tel.: +49 751 89-0, Fax: +49 751 89-1300