Brochure

ManualsBrandsRAFI ManualsInput & Output DevicesContact 1 breaker, 1 maker momentary 24 Vdc X 22FS 1 pc(s)

FAST & SLIM

Everything else is outdated.

RAFIX 22 FS

Summary of content (72 pages)

PAGE 1
+ RAFIX 22 FS FAST & SLIM Everything else is outdated.
PAGE 2
RAFIX 22 FS+ FAST & SLIM 2
PAGE 3
rafix 22 fs + FAST & SLIM Everything else is outdated. Design is the key! New technologies and new materials make new design worlds possible. That not only goes for Colani and his motor truck vision of the future but also for the control unit in your machine.
PAGE 4
RAFIX 22 FS+ FAST & SLIM Design IS THE KEY Enjoy the look of your operating panel just like your customer will. The front elements feature a classically elegant design and guarantee reliable data input.
PAGE 5
Design The RAFIX 22 FS+ series sets new standards in the control component field. Extremely flat construction and functional esthetic design are absolutely essential in an increasingly designoriented industrial environment. The wide variety and variability of actuators give your designer complete de- sign freedom: round or square collar types, radiant colors and homogenous illumination of the large actuating areas are basic features.
PAGE 6
RAFIX 22 FS+ FAST & SLIM 6
PAGE 7
PCB & QC – TWO SYSTEMS, ONE TARGET: EFFICIENCY In front of the front panel control components are functionally identical. Behind it you’ll find the differences which make life easier for your production engineer and number work simpler for your accountant.
PAGE 8
RAFIX 22 FS+ FAST & SLIM COMMON SYSTEM DATA Front panel Panel cut-out The actuators featured in the RAFIX 22 FS+ series are suitable for 22.3 mm panel cut-outs according to IEC 60947-5-1. All actuators are equipped with a locating pip. This locating pip ensures the perfect fit of actuators and contact blocks for PCB-mounted components and is therefore essential for a design built with these contact blocks. Grid spacing The design principle makes it possible to use a minimum grid spacing of 30 mm x 30 mm.
PAGE 9
SYSTEM STRUCTURE with pcb contact blocks PCB mounting The PCB contact blocks are soldered on the printed circuit board. Two options for actuator illumination are available: 1.) A 3 mm LED which is inserted into the base of the contact block and soldered together with the contact block on the printed circuit board. in the actuators, so the entire system is very low.
PAGE 10
RAFIX 22 FS+ FAST & SLIM SYSTEM STRUCTURE with QC contact blocks Essential features • Mounting depth only 27 mm including LED clip and cable lugs • Quick-connect/solder terminals 2.8 x 0.
PAGE 11
Dimensional drawing with QC contact blocks Keylock switch Signal indicator Emergency stop Selector switch Pushbutton 1...3mm 25.70 `0.30 27.10 +- 0.30 min. 30.
PAGE 12
RAFIX 22 FS+ FAST & SLIM ACTUATORS Content RAFIX 22 FS+ - Pushbuttons + RAFIX 22 FS - Pushbutton, flush lens, round collar + RAFIX 22 FS - Pushbutton, protruding lens, round collar + RAFIX 22 FS - Pushbutton, protruding front ring, round collar + RAFIX 22 FS - Pushbutton, flush lens, square collar + RAFIX 22 FS - Pushbutton, protruding lens, square collar + RAFIX 22 FS - Pushbutton, protruding front ring, square collar 13 15 16 17 18 19 20 RAFIX 22 FS+ - Pushbuttons with protective cap + RAFIX 22 FS - P
PAGE 13
Actuators RAFIX 22 FS+ - Pushbuttons Panel cut-out to IEC 60947-5-1 Technical Data General information Form of lens Colour of lens Colour of front ring Form of collar Mechanical characteristics see order block see order block see order block see order block Dimensions Dimensions of collar Overall height Mounting depth Mounting hole Key grid see order block see order block see order block 22.
PAGE 14
RAFIX 22 FS+ FAST & SLIM ActuAtors Accessories RAFIX 22 FS+ - Pushbuttons Description Photo Additional accessories see page Order no.
PAGE 15
Actuators RAFIX 22 FS+ - Pushbutton, flush lens, round collar Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes translucent white 1.30.270.001/22xx 1.30.270.021/2200 1.30.270.011/22xx 1.30.270.031/2200 yes translucent red 1.30.270.001/23xx 1.30.270.021/2300 1.30.270.011/23xx 1.30.270.031/2300 yes translucent yellow 1.30.270.001/24xx 1.30.270.
PAGE 16
RAFIX 22 FS+ FAST & SLIM ActuAtors RAFIX 22 FS+ - Pushbutton, protruding lens, round collar Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes translucent white 1.30.270.201/22xx 1.30.270.221/2200 1.30.270.211/22xx 1.30.270.231/2200 yes translucent red 1.30.270.201/23xx 1.30.270.221/2300 1.30.270.211/23xx 1.30.270.231/2300 yes translucent yellow 1.
PAGE 17
Actuators RAFIX 22 FS+ - Pushbutton, protruding front ring, round collar Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Plastic front ring Metallized front ring Order no. latching Plastic front ring Metallized front ring yes translucent white 1.30.270.401/22xx 1.30.270.421/2200 - - yes translucent red 1.30.270.401/23xx 1.30.270.421/2300 - - yes translucent yellow 1.30.270.401/24xx 1.30.270.421/2400 - - yes translucent green 1.30.270.401/25xx 1.
PAGE 18
RAFIX 22 FS+ FAST & SLIM ActuAtors RAFIX 22 FS+ - Pushbutton, flush lens, square collar Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes translucent white 1.30.270.051/22xx 1.30.270.071/2200 1.30.270.061/22xx 1.30.270.081/2200 yes translucent red 1.30.270.051/23xx 1.30.270.071/2300 1.30.270.061/23xx 1.30.270.081/2300 yes translucent yellow 1.30.
PAGE 19
Actuators RAFIX 22 FS+ - Pushbutton, protruding lens, square collar Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes translucent white 1.30.270.251/22xx 1.30.270.271/2200 1.30.270.261/22xx 1.30.270.281/2200 yes translucent red 1.30.270.251/23xx 1.30.270.271/2300 1.30.270.261/23xx 1.30.270.281/2300 yes translucent yellow 1.30.270.251/24xx 1.30.270.
PAGE 20
RAFIX 22 FS+ FAST & SLIM ActuAtors RAFIX 22 FS+ - Pushbutton, protruding front ring, square collar Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Plastic front ring Metallized front ring Order no. latching Plastic front ring Metallized front ring yes translucent white 1.30.270.451/22xx 1.30.270.471/2200 - - yes translucent red 1.30.270.451/23xx 1.30.270.471/2300 - - yes translucent yellow 1.30.270.451/24xx 1.30.270.
PAGE 21
Actuators RAFIX 22 FS+ - Pushbuttons with protective cap Panel cut-out to IEC 60947-5-1 Technical Data General information Form of lens Colour of lens Colour of front ring Form of collar Mechanical characteristics see order block see order block see order block see order block Dimensions Dimensions of collar Overall height Mounting depth Mounting hole Key grid see order block see order block see order block 22.
PAGE 22
RAFIX 22 FS+ FAST & SLIM ActuAtors Accessories RAFIX 22 FS+ - Pushbuttons with protective cap Description Photo Additional accessories see page Order no.
PAGE 23
Actuators RAFIX 22 FS+ - Pushbutton, with protective cap, flush lens, round collar Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes translucent white 1.30.270.005/22xx - - - yes translucent red 1.30.270.005/23xx - - - yes translucent yellow 1.30.270.005/24xx - - - yes translucent green 1.30.270.005/25xx - - - yes translucent blue 1.30.
PAGE 24
RAFIX 22 FS+ FAST & SLIM ActuAtors RAFIX 22 FS+ - Pushbutton, with protective cap, flush lens, square collar Panel cut-out to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes translucent white 1.30.270.055/22xx - - - yes translucent red 1.30.270.055/23xx - - - yes translucent yellow 1.30.270.055/24xx - - - yes translucent green 1.30.270.
PAGE 25
Actuators RAFIX 22 FS+ - Selector switches Panel cut-out to IEC 60947-5-1 General Data The illuminated selector switches are provided with translucent handle markings. These are opaque on the non-illuminated versions. Technical Data General information Actuator Marking of handle Colour of front ring Form of collar Mechanical characteristics handle see order block see order block see order block Dimensions Dimensions of collar Overall height Mounting depth Mounting hole Key grid see order block 22.
PAGE 26
RAFIX 22 FS+ FAST & SLIM ActuAtors Accessories RAFIX 22 FS+ - Selector switches Description Photo Additional accessories see page Order no.
PAGE 27
Actuators RAFIX 22 FS+ - Selector switch, round collar Panel cut-out to IEC 60947-5-1 Illuminability Contact function Rotating angle Order no. Plastic front ring Metallized front ring yes momentary 1 x 40° 1.30.272.001/22xx 1.30.272.002/2200 yes momentary 2 x 40° 1.30.272.026/22xx 1.30.272.027/2200 yes latching 1 x 90°, form L 1.30.272.101/22xx 1.30.272.102/2200 yes latching 1 x 90°, form V 1.30.272.201/22xx 1.30.272.202/2200 yes latching 2 x 60° 1.30.272.301/22xx 1.30.272.
PAGE 28
RAFIX 22 FS+ FAST & SLIM ActuAtors RAFIX 22 FS+ - Selector switch, square collar Panel cut-out to IEC 60947-5-1 Illuminability Contact function Rotating angle Order no. Plastic front ring Metallized front ring yes momentary 1 x 40° 1.30.272.051/22xx 1.30.272.052/2200 yes momentary 2 x 40° 1.30.272.076/22xx 1.30.272.077/2200 yes latching 1 x 90°, form L 1.30.272.151/22xx 1.30.272.152/2200 yes latching 1 x 90°, form V 1.30.272.251/22xx 1.30.272.252/2200 yes latching 2 x 60° 1.
PAGE 29
Actuators RAFIX 22 FS+ - Keylock switch Panel cut-out to IEC 60947-5-1 Technical Data General information Colour of front ring Form of collar Mechanical characteristics see order block see order block Torque max. 1.3 Nm Other specifications Dimensions Dimensions of collar Overall height Mounting depth Mounting hole Key grid see order block 44.1 mm see order block 22.
PAGE 30
RAFIX 22 FS+ FAST & SLIM ActuAtors Accessories RAFIX 22 FS+ - Keylock switch Description Photo Additional accessories see page Order no. RAFIX 22 FS+ - Contact block PCB gold, Universal - 59 RAFIX 22 FS+ - Contact block PCB silver, Universal - 63 RAFIX 22 FS+ - Contact block QC gold, Universal, with light conductor - 52 RAFIX 22 FS+ - Contact block QC silver, Universal, with light conductor - 55 Fixing spanner for ring nut and front ring 5.05.800.
PAGE 31
Actuators RAFIX 22 FS+ - Keylock switch, round collar Panel cut-out to IEC 60947-5-1 Contact function Rotating angle Key removal position Rotating angle Order no. Plastic front ring Metallized front ring momentary 1 x 40° 0 1.30.255.001/xxxx 1.30.255.002/0000 momentary 2 x 40° 0 1.30.255.101/xxxx 1.30.255.102/0000 latching 1 x 90°, form L 0+1 1.30.255.221/xxxx 1.30.255.222/0000 latching 1 x 90°, form L 0 1.30.255.201/xxxx 1.30.255.202/0000 latching 1 x 90°, form V 0+1 1.30.
PAGE 32
RAFIX 22 FS+ FAST & SLIM ActuAtors RAFIX 22 FS+ - Keylock switch, square collar Panel cut-out to IEC 60947-5-1 Contact function Rotating angle Key removal position Rotating angle Order no. Plastic front ring Metallized front ring momentary 1 x 40° 0 1.30.255.051/xxxx 1.30.255.052/0000 momentary 2 x 40° 0 1.30.255.151/xxxx 1.30.255.152/0000 latching 1 x 90°, form L 0+1 1.30.255.271/xxxx 1.30.255.272/0000 latching 1 x 90°, form L 0 1.30.255.251/xxxx 1.30.255.
PAGE 33
Actuators RAFIX 22 FS+ - Mushroom-headed pushbutton Reset by pulling Reset by rotation, illuminated Panel cut-out to IEC 60947-5-1 Technical Data General information Form of lens Colour of lens Form of collar Mechanical characteristics conical mushroom form black round Dimensions Mushroom Diameter Overall height Mounting depth Mounting hole Key grid Diameter of collar 30 mm see order block see order block 22.3 mm 33.2 mm 29.
PAGE 34
RAFIX 22 FS+ FAST & SLIM ActuAtors Accessories RAFIX 22 FS+ - Mushroom-headed pushbutton Description Photo Additional accessories see page Order no.
PAGE 35
Actuators RAFIX 22 FS+ - Emergency stop pushbutton Panel cut-out to IEC 60947-5-1 General Data The emergency stop pushbuttons comply with IEC 60 204, IEC 60 073, IEC 60 947 and VDE 0113 Part 1. They are designed dupe-proof according to EN 418 with a positive mechanical movement sequence. A certain operating force must be exerted at the action point in order to prevent inadvertent operation. The pushbutton latches when pressed.
PAGE 36
RAFIX 22 FS+ FAST & SLIM ActuAtors Approvals IEC 60947-5-x, 60904, 60073 UL 508,C22.2 No. 14-M91 CCC in preparation Accessories RAFIX 22 FS+ - Emergency stop pushbutton Description Photo Additional accessories see page Order no. Emergency stop label, Ø 22.
PAGE 37
Actuators RAFIX 22 FS+ - Emergency stop pushbutton, reset by rotation Panel cut-out to IEC 60947-5-1 Reset Illuminability Degree of protection from front side Order no. by clockwise rotation yes, lens transparent red IP65 1.30.273.001/2300 by clockwise rotation yes, lens transparent white IP65 1.30.273.001/2200 by clockwise rotation no IP65 1.30.273.
PAGE 38
RAFIX 22 FS+ FAST & SLIM ActuAtors RAFIX 22 FS+ - Emergency stop pushbutton „Plus 1“ Panel cut-out to IEC 60947-5-1 General Data RAFIX 22 FS „Plus 1“ Emergency stop pushbutton with 2 NC and 1 NO contacts This special emergency stop pushbutton offers two redundant normally-closed contacts for the emergency off / emergency stop function and an additional signal contact. Unique design: 3 contacts accommodated in very compact dimensions (mounting depth 9.2 or 27 mm).
PAGE 39
Actuators Approvals CCC in preparation Accessories RAFIX 22 FS+ - Emergency stop pushbutton „Plus 1“ Description Photo Additional accessories see page Order no. Emergency stop label, Ø 22.3 mm - 68 RAFIX 22 FS+ - Contact block PCB gold, E-Stop „Plus 1“ 1.20.126.414/0000 60 RAFIX 22 FS+ - Contact block QC gold, E-Stop „Plus 1“ 1.20.126.514/0000 53 Fixing spanner for ring nut and front ring 5.05.800.
PAGE 40
RAFIX 22 FS+ FAST & SLIM ActuAtors RAFIX 22 FS+ - Emergency stop pushbutton „Plus 1“, reset by pulling (IP65,IP69K) Panel cut-out to IEC 60947-5-1 Reset Illuminability Degree of protection from front side Order no. by pulling no IP65, IP69K 1.30.273.602/0300 Technical data see page 38 40 Rafi-22FS_en_04-04-2012.indd 40 05.04.
PAGE 41
Actuators RAFIX 22 FS+ - Potentiometer drive Pict: assembled Pict: delivery content Panel cut-out to IEC 60947-5-1 Technical Data General information Actuator Colour of knob Front ring Form of collar Mechanical characteristics knob see order block see order block see order block Dimensions Dimensions of collar Overall height Mounting depth Mounting hole Key grid see order block 26 mm according to potentiometer Robustness min.
PAGE 42
RAFIX 22 FS+ FAST & SLIM ActuAtors Accessories RAFIX 22 FS+ - Potentiometer drive Description Photo Fixing spanner for ring nut and front ring Additional accessories see page Order no. 5.05.800.062/0000 65 RAFIX 22 FS+ - Potentiometer drive, round collar Pict: assembled Panel cut-out to IEC 60947-5-1 Front ring Colour of knob Order no. plastic slate-grey opaque slate-grey 1.30.258.001/0700 Technical data see page 41 For potentiometers with 6 mm shaft diameter and 50 mm shaft length.
PAGE 43
Indicators RAFIX 22 FS+ - Signal indicator Panel cut-out to IEC 60947-5-1 Technical Data General information Form of lens Colour of lens Form of collar Mechanical characteristics see order block see order block see order block Robustness min. Other specifications Dimensions Length of collar Overall height Mounting depth Mounting hole Key grid see order block see order block see order block 22.
PAGE 44
RAFIX 22 FS+ FAST & SLIM IndIcAtors Accessories RAFIX 22 FS+ - Signal indicator Description Photo Additional accessories see page Order no. LED base for 3 mm THT LEDs, used in signal indicators, for RAFIX 22 FS+ PCB - 67 QC LED base for signal indicators - 65 Fixing spanner for ring nut and front ring 5.05.800.062/0000 65 RAFIX 22 FS+ - Signal indicator, round collar, flat version 8.75 9.70 1...3mm Ø 29.80 M 22.
PAGE 45
Indicators RAFIX 22 FS+ - Signal indicator, round collar, high version Panel cut-out to IEC 60947-5-1 Form of collar Colour of lens Order no. round translucent white 1.74.508.011/2200 round translucent red 1.74.508.011/2300 round translucent yellow 1.74.508.011/2400 round translucent green 1.74.508.011/2500 round translucent blue 1.74.508.011/2600 Technical data see page 43 45 Rafi-22FS_en_04-04-2012.indd 45 05.04.
PAGE 46
RAFIX 22 FS+ FAST & SLIM IndIcAtors RAFIX 22 FS+ - Signal indicator, square collar, flat version 8.75 9.70 1...3mm 29.80 M 22.00 x1 Panel cut-out to IEC 60947-5-1 Form of collar Colour of lens Order no. square translucent white 1.74.508.051/2200 square translucent red 1.74.508.051/2300 square translucent yellow 1.74.508.051/2400 square translucent green 1.74.508.051/2500 square translucent blue 1.74.508.051/2600 Technical data see page 43 Legending on request.
PAGE 47
Indicators RAFIX 22 FS+ - Signal indicator, square collar, high version Panel cut-out to IEC 60947-5-1 Form of collar Colour of lens Order no. square translucent white 1.74.508.061/2200 square translucent red 1.74.508.061/2300 square translucent yellow 1.74.508.061/2400 square translucent green 1.74.508.061/2500 square translucent blue 1.74.508.061/2600 Technical data see page 43 47 Rafi-22FS_en_04-04-2012.indd 47 05.04.
PAGE 48
RAFIX 22 FS+ FAST & SLIM AccessorIes RAFIX 22 FS+ - USB feedthrough Panel cut-out to IEC 60947-5-1 General Data Rugged USB feedthroughs for 22.3 mm mounting hole diameter matching the RAFIX 22 FS and RAFIX 22 QR actuator series. The USB feedthrough provides sturdy installation of an easily accessible USB slot in front panels of controllers and IPCs and can be used, for example, to connect a keyboard for maintenance purposes or a USB stick for a software update.
PAGE 49
Accessories Approvals IEC 60947-5-x, 60904, 60073 UL 508,C22.2 No. 14-M91 CCC in preparation Accessories RAFIX 22 FS+ - USB feedthrough Description Photo Fixing spanner for ring nut and front ring Additional accessories see page Order no. 5.05.800.062/0000 65 RAFIX 22 FS+ - USB feedthrough, round collar Panel cut-out to IEC 60947-5-1 Colour of front ring Front connection Rear connection Order no. slate-grey USB Type A USB Type B 1.30.279.001/0700 metallized USB Type A USB Type B 1.30.
PAGE 50
RAFIX 22 FS+ FAST & SLIM AccessorIes RAFIX 22 FS+ - USB feedthrough, square collar Panel cut-out to IEC 60947-5-1 Colour of front ring Front connection Rear connection Order no. slate-grey USB Type A USB Type B 1.30.279.051/0707 metallized USB Type A USB Type B 1.30.279.071/0707 Technical data see page 48 50 Rafi-22FS_en_04-04-2012.indd 50 05.04.
PAGE 51
Contact blocks RAFIX 22 FS+ - Contact block QC gold Universal with light conductor E-Stop General Data The contact blocks are inserted into the actuators and latch there permanently. Emergency stop pushbuttons require special contact blocks which can be recognised by the plungers situated closer to the middle. In addition, the emergency stop contact blocks and actuators feature two assembly guides which prevent rotation during assembly.
PAGE 52
RAFIX 22 FS+ FAST & SLIM contAct blocks Approvals IEC 60947-5-x, 60904, 60073 UL 508,C22.2 No. 14-M91 CCC in preparation Accessories RAFIX 22 FS+ - Contact block QC gold Description Photo Additional accessories see page Order no. LED base for contact blocks QC - 66 RAFIX 22 FS+ - Contact block QC gold, Universal, with light conductor Universal with light conductor Contact arrangement Lamp optional Operating life at 10 mA / 24V DC B10 Colour of plunger Order no.
PAGE 53
Contact blocks RAFIX 22 FS+ - Contact block QC gold, E-Stop, with light conductor E-Stop Contact arrangement Lamp optional Operating life at 10 mA / 24V DC B10 Colour of plunger Order no. 2 NC LED-Clip 1,000,000 1,300,000 red 1.20.126.504/9000 1 NC + 1 NO LED-Clip 1,000,000 1,300,000 yellow 1.20.126.503/9000 Technical data see page 51 Caution: Emergency stop contact blocks can only be used with emergency stop pushbuttons.
PAGE 54
RAFIX 22 FS+ FAST & SLIM contAct blocks RAFIX 22 FS+ - Contact block QC silver General Data The contact blocks are inserted into the actuators and latch there permanently. Emergency stop pushbuttons require special contact blocks which can be recognised by the plungers situated closer to the middle. In addition, the emergency stop contact blocks and actuators feature two assembly guides which prevent rotation during assembly.
PAGE 55
Contact blocks Approvals IEC 60947-5-x, 60904, 60073 UL 508,C22.2 No. 14-M91 CCC in preparation Accessories RAFIX 22 FS+ - Contact block QC silver Description Photo Additional accessories see page Order no. Female quick-connect terminal DIN 46340-B 2.8-1-MS - 65 LED base for contact blocks QC - 66 RAFIX 22 FS+ - Contact block QC silver, Universal, with light conductor Contact arrangement Lamp optional Colour of plunger Order no. 1 NC + 1 NO LED-Clip red and green 1.20.126.
PAGE 56
RAFIX 22 FS+ FAST & SLIM contAct blocks RAFIX 22 FS+ - Contact block QC silver, E-Stop, with light conductor Contact arrangement Lamp optional Colour of plunger Order no. 2 NC LED-Clip red 1.20.126.704/9000 1 NC + 1 NO LED-Clip yellow 1.20.126.703/9000 Technical data see page 54 Please note: E-stop contact blocks can only be combined with E-stop actuators. 56 Rafi-22FS_en_04-04-2012.indd 56 05.04.
PAGE 57
Contact blocks RAFIX 22 FS+ - Contact block PCB gold Universal, 1 NC + 1 NO E-Stop, 2 NC General Data Illumination information The PCB contact blocks are included into the PCB layout and arranged next to other components. They are located directly behind the actuators at a distance of only 9.2 mm behind the front panel. When actuators shall be illuminated there are 2 alternative LED technologies. THT LEDs: Can be assembled and soldered together with the PCB contact blocks.
PAGE 58
RAFIX 22 FS+ FAST & SLIM contAct blocks Approvals IEC 60947-5-x, 60904, 60073 UL 508,C22.2 No. 14-M91 CCC in preparation Accessories RAFIX 22 FS+ - Contact block PCB gold Description Photo Additional accessories see page Order no.
PAGE 59
Contact blocks RAFIX 22 FS+ - Contact block PCB gold, Universal Contact arrangement Lamp optional Operating life B10 at 10 mA / 24 V DC Colour of plunger Order no. 1 NC + 1 NO THT LED 1,000,000 1,300,000 red and green 1.20.126.003/0000 2 NC THT LED 1,000,000 1,300,000 red 1.20.126.004/0000 2 NO THT LED 1,000,000 1,300,000 green 1.20.126.
PAGE 60
RAFIX 22 FS+ FAST & SLIM contAct blocks RAFIX 22 FS+ - Contact block PCB gold, E-Stop Contact arrangement Lamp optional Operating life B10 at 10 mA / 24 V DC Colour of plunger Order no. 2 NC THT LED 1,000,000 1,300,000 red 1.20.126.404/0000 1 NC + 1 NO THT LED 1,000,000 1,300,000 yellow 1.20.126.403/0000 Technical data see page 57 Caution: Emergency stop contact blocks can only be used with emergency stop pushbuttons.
PAGE 61
Contact blocks RAFIX 22 FS+ - Contact block PCB silver Universal, 1 NC + 1 NO E-Stop with light conductor General Data Illumination information The PCB contact blocks are included into the PCB layout and arranged next to other components. They are located directly behind the actuators at a distance of only 9.2 mm behind the front panel. When actuators shall be illuminated there are 2 alternative LED technologies. THT LEDs: Can be assembled and soldered together with the PCB contact blocks.
PAGE 62
RAFIX 22 FS+ FAST & SLIM contAct blocks Approvals IEC 60947-5-x, 60904, 60073 UL 508,C22.2 No. 14-M91 CCC in preparation Accessories RAFIX 22 FS+ - Contact block PCB silver Description Photo Additional accessories see page Order no. LED 3 mm - 67 LED base for 3 mm THT LEDs, used in signal indicators, for RAFIX 22 FS+ PCB - 67 SMT LED - 66 Spacers, round - 69 Spacers, triangular - 70 62 Rafi-22FS_en_04-04-2012.indd 62 05.04.
PAGE 63
Contact blocks RAFIX 22 FS+ - Contact block PCB silver, Universal, with light conductor Contact arrangement Lamp optional Colour of plunger Order no. 1 NC + 1 NO SMT LED red and green 1.20.126.203/9000 2 NC SMT LED red 1.20.126.204/9000 2 NO SMT LED green 1.20.126.205/9000 Technical data see page 61 RAFIX 22 FS+ - Contact block PCB silver, Universal Contact arrangement Lamp optional Colour of plunger Order no. 1 NC + 1 NO THT LED red and green 1.20.126.
PAGE 64
RAFIX 22 FS+ FAST & SLIM contAct blocks RAFIX 22 FS+ - Contact block PCB silver, E-Stop, with light conductor Contact arrangement Lamp optional Colour of plunger Order no. 2 NC SMT LED red 1.20.126.604/9000 1 NC + 1 NO SMT LED yellow 1.20.126.603/9000 Technical data see page 61 Caution: Emergency stop contact blocks can only be used with emergency stop pushbuttons. RAFIX 22 FS+ - Contact block PCB silver, E-Stop Contact arrangement Lamp optional Colour of plunger Order no.
PAGE 65
Special accessories Fixing spanner for ring nut and front ring Description Fitting for Order no. Fixing spanner for ring nut and front ring RAFIX 22 QR/FS 5.05.800.062/0000 QC LED base for signal indicators Description Order no. RAFIX 22 FS - Socket for LED-Clip, quick-connect terminals 5.05.511.855/9000 Female quick-connect terminal DIN 46340-B 2.8-1-MS Description Order no. Female quick-connect terminal DIN 46340-B 2.8-1-MS 5.37.540.
PAGE 66
RAFIX 22 FS+ FAST & SLIM specIAl AccessorIes LED base for contact blocks QC Description Order no. LED-Clip, LED red, 24 V DC 5.05.511.747/1300 LED-Clip, LED yellow, 24 V DC 5.05.511.747/1400 LED-Clip, LED green, 24 V DC 5.05.511.747/1500 LED-Clip, LED blue, 24 V DC 5.05.511.747/1600 LED-Clip, LED white, 24 V DC 5.05.511.747/1200 LED-Clip, LED red, 12 V DC 5.05.511.747/0300 LED-Clip, LED yellow, 12 V DC 5.05.511.747/0400 LED-Clip, LED green, 12 V DC 5.05.511.
PAGE 67
Special accessories LED base for 3 mm THT LEDs, used in signal indicators, + for RAFIX 22 FS PCB Description Order no. LED base for signal indicators, height 5 mm 5.30.109.020/0756 THT LED 3 mm, without base Socket Colour Forward voltage typ. UF at IF Max. current, IF without socket white 3,6 V / 20 mA 30 mA - 1.90.690.295/0000 without socket red 1,6 V / 1 mA 30 mA - 1.90.690.228/0000 without socket red 1.9 V / 20 mA 50 mA - 1.90.690.269/0000 without socket yellow 1.
PAGE 68
RAFIX 22 FS+ FAST & SLIM specIAl AccessorIes Emergency stop label, Ø 22.3 mm Dimensions inside Ø Label Order no. 36 x 64 mm 22.3 mm - 5.76.205.011/0400 Ø 40 mm 22.3 mm „NOT-HALT, EMERGENCY STOP, ARRET D´URGENCE, 5.76.204.115/0400 EMERGENZA” Ø 40 mm 22.3 mm 4 x „NOT-AUS” 5.76.204.119/0400 Ø 40 mm 22.3 mm 4 x „NOT-HALT” 5.76.204.117/0400 Ø 40 mm 22.3 mm 4 x „EMERGENCY STOP” 5.76.204.121/0400 Ø 60 mm 22.3 mm 1 x „NOT-AUS” 5.76.204.101/0400 Ø 60 mm 22.
PAGE 69
Special accessories Spacers, round round version Height Order no. 6.25 mm 5.30.759.034/0000 6.50 mm 5.30.759.035/0000 6.75 mm 5.30.759.036/0000 7 mm 5.30.759.037/0000 7.25 mm 5.30.759.038/0000 7.50 mm 5.30.759.039/0000 7.75 mm 5.30.759.040/0000 8 mm 5.30.759.041/0000 8.25 mm 5.30.759.042/0000 Required spacer length = Overall height of key - front panel thickness - 0.5 mm (area embossing). 69 Rafi-22FS_en_04-04-2012.indd 69 05.04.
PAGE 70
RAFIX 22 FS+ FAST & SLIM specIAl AccessorIes Spacers, triangular Overlay Front panel Spacer PCB Countersink from height > 4 mm triangular version Height Order no. 6.25 mm 5.30.759.109/0000 6.50 mm 5.30.759.110/0000 6.75 mm 5.30.759.111/0000 7 mm 5.30.759.112/0000 7.25 mm 5.30.759.113/0000 7.50 mm 5.30.759.114/0000 7.75 mm 5.30.759.115/0000 8 mm 5.30.759.116/0000 8.25 mm 5.30.759.117/0000 Required spacer length = Overall height of key - front panel thickness - 0.5 mm (area embossing).
PAGE 71
PAGE 72
RAFIX 22 FS+ FAST & SLIM Everything else is outdated. Printed: 2012/05/02 Technical data are approximate and intended solely for general orientation in the selection of a product. Subject to modifications and errors. Images and other graphics may only be similar. For more information, refer to www.rafi.de chapter Imprint / Data Protection. RAFI GmbH & Co. KG Ravensburger Str. 128-134, 88276 Berg/Ravensburg, Germany Phone: +49 751 89-0, Fax: +49 751 89-13 00 www.rafi.de, info@rafi.