Brochure

Locating indent 1
1.60
Contact A2
1.80
Locating indent 2
1.60
Contact B2
13.00
10.80
1.60
Contact B1
7.80
1.30
1.60
Contact A1
27.50
Barred area
Pad dimensions
X
2NO
1NC + 1NO
Plus 1
1NO
13 - 14
LED*
X1 - X2
LED*
X1 - X2
LED*
X1 - X2
LED*
X1 - X2
LED*
X1 - X2
1NO
33 - 34
1NO
13 - 14
1NC
11 - 12
1NO
13 - 14
1NC
11 - 12
1NC
21 - 22
1NO
23 - 24
1NC
21 - 22
1NC
21 - 22
1NC
21 - 22
*:only if required
*:only if required
Contact assignment
Contact A1/A2
terminal marking
Contact B1/B2
terminal marking
Contact C1/C2
terminal marking
4.46
3.28
n2.56
0.18
Soldering pad
Pad dimensions
1NO
1NC
2NC
9
SYSTEM STRUCTURE
PCB mounting
The PCB contact blocks are soldered on
the printed circuit board. Two options for
actuator illumination are available:
1.)A3mmLEDwhichisinsertedintothe
base of the contact block and soldered
together with the contact block on the
printed circuit board.
2.)AseparatelyplacedSMTLEDwhose
light is transported by the light conduc-
tor and distributed over the entire sur-
face of the lenses.
The printed circuit board is fastened to
the front panel with bolts, while the con-
tact blocks are almost fully submerged
Contact diagram for selector and keylock switches
PCB hole pattern with THT LED
(view of component side)
PCB hole pattern with SMT LED
(view of component side)
in the actuators, so the entire system is
very low. Further benets: individual
wiring is not required, and it is no longer
necessary to cut out the printed circuit
board around the control components.
min. 30.00
1...3mm
9.25 0.10
Distance bushing
Pushbutton with protective cap
Pushbutton
Selector switch
Keylock switch
Emergency stop
Signal indicator
+
-
Plus 1
1NO
13 - 14
LED*
X1 - X2
LED*
X1 - X2
LED*
X1 - X2
LED*
X1 - X2
LED*
X1 - X2
1NO
33 - 34
1NO
13 - 14
1NC
11 - 12
1NO
13 - 14
1NC
11 - 12
1NC
21 - 22
1NO
23 - 24
1NC
21 - 22
1NC
21 - 22
1NC
21 - 22
*:only if required
*:only if required
Contact assignment
Contact A1/A2
terminal marking
Contact B1/B2
terminal marking
Contact C1/C2
terminal marking
Contact A1
Locating indent 1
Contact B1
Contact C1
Contact C2
Contact B2
Contact A2
Barred area
Locating indent 2
2NO
1NC + 1NO
1NO
1NC
2NC
WITH PCB CONTACT BLOCKS
All actuators with 3 switch positions All actuators with 2 switch positions
(A1/A2; B1/B2)
Contact diagram for selector and keylock switches
A1/A2 B1/B2
Alle Betätiger mit 3 Schaltstellungen Alle Betätiger mit 2 Schaltstellungen
A1/A2; B1/B2A1/A2 B1/B2
Kontaktschema für Wahl- und Schlüsselschalter