Brochure

48
AccessorIes
Panel cut-out to IEC 60947-5-1
RAFIX 22 FS
+
- USB feedthrough
General Data
Rugged USB feedthroughs for 22.3 mm mounting hole
diameter matching the RAFIX 22 FS and RAFIX 22 QR
actuator series. The USB feedthrough provides sturdy
installation of an easily accessible USB slot in front panels
of controllers and IPCs and can be used, for example,
to connect a keyboard for maintenance purposes or
a USB stick for a software update. The port on the rear
accommodates commercially available USB cables of
varying lengths with B-type connector. A sealing cap
protects the slot and ensures a degree of protection to
IP 65. For assembly, simply insert the feedthrough from
the front side into the mounting hole and fasten it by
means of a ring nut from the rear. The depth behind panel
is 27.7 mm. The colour of the front ring can be freely
selected so that the USB feedthrough can be matched
in appearance to the customer-specific design.
Technical Data
General information
Form of lens see order block
Colour of lens see order block
Colour of front ring see order block
Form of collar see order block
Dimensions
Dimensions of collar see order block
Overall height 11.3 mm
Mounting depth 27.7 mm
Mounting hole 22.3 mm
Key grid 30 x 30 mm
Mechanical design
Mounting ring nut
Front connection USB Type A
Rear connection USB Type B
Torque for nut ring 1.2 Nm
Other specifications
Ambient temp. operating min. -25 °C
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Operating life 1500 operations
Degree of protection from IP65 (closed sealing
front side cap)
Relative humidity 5 bis 95% (non
condensed)
Shock resistance to 50 g at 11 ms half sine
IEC 60068-2-27 (EN 61131-2) amplitude
Vibration resistance according 5 g at 10...500 Hz
to IEC 600 68-2-6 (EN 61131-2)
RAFIX 22 FS
+
FAST & SLIM
Rafi-22FS_en_04-04-2012.indd 48 05.04.2012 11:54:48