Brochure

PCB version
PCB version
7
PCB & QC – TWO SYSTEMS,
ONE TARGET: EFFICIENCY
In front of the front panel control components are functionally identical. Behind it
you’ll find the differences which make life easier for your production
engineer and number work simpler for your accountant.
Easy to assemble on the
printed circuit board
PCB contact blocks for high production
volumes
•If you produce your input systems in
large volumes, or
•ifyouuseaprintedcircuitboardforthe
electronics, displays and other compo-
nents anyway, or
•if you are planning combination with
short-travel keyswitches,
RAFIX22FS
+
with PCB contact blocks is
the only real choice.
Simply include the PCB contacts and
LEDsinthelayoutoftheprintedcircuit
board and solder them during produc-
tion – just as simply as the other compo-
nents on a common printed board.
Your benefits: cost savings and reduc-
tionofassemblyerrors.Anddon’tworry
about using up space: the contact blocks
require only 9.2 mm of space between
the printed circuit board and the front
panel.
Quick
Connect
QC contact blocks for maximum vari-
ability
When the investment for the layout and
production of a printed circuit board
does not pay off, your best choice is our
QC contact blocks with quick connect
terminals. The contact blocks are plugged
into the actuators from behind and lock
firmly into place.
Blade terminals enable simple wiring,
without any additional devices or spe-
cial tools. The enclosed space in the
RAFIX 22 FS
+
control components is
alsoused efficientlyfor the QCcontact
blocks whose mounting depth including
the LED clip and cable lugs is only
27 mm.
Quick Connect version