Datasheet

Screw terminals
Spring-type terminals
Insert the wire /PENTHETERMINAL
Tighten the screw Insert the wire
Done Remove the screwdriver
Assembly
Versatility of design for customized panels
The RAFIX 22 QR system does not only have a
particularly low profile and is also available in
many different versions. Your design options for
your customized panels are nearly unlimited
thanks to the interchangeable front rings and
lenses. In this way you can achieve an
attractive design while ensuring safe
operation of your equipment at the same
time. RAFIX 22 QR components are
available either with a round or with a
square collar.
Terminals
The RAFIX 22 QR contact blocks are available in different
connection styles as required for your application:
s3CREWTERMINALS
The terminals are open and the captive screws are
mounted in the terminal recess.
s1UICKCONNECTSOLDERTERMINALSXMM
s3PRINGTYPETERMINALS
3IMPLYINSERTASCREWDRIVERTOOPENTHETERMINALINSERT
the cable and remove the screwdriver to close the
terminal.
s2*TERMINAL
Just plug in the cable with a RJ 12 connector.
s!3)NTERFACE
Your advantage:
This offers your savings in three ways:
s$RASTICALLYREDUCEDASSEMBLYTIMETHANKSTOWIRE
insertion from the rear, i. e. no more bending and lateral
insertion of the wires required.
s9OUSAVEMATERIAL.OWIREENDSLEEVESAREREQUIRED
s9OUSAVETHETIMEPREVIOUSLYREQUIREDFORMOUNTINGTHE
wire end sleeves.
RAFIX 22 QR
2
RAFIX
22 QR
 #ONTROLCOMPONENTS