Datasheet

The RAFIX 22 QR control component
range meets all the technical require-
ments and current standards for
control units. The system is of modu-
lar design. Actuators, contact blocks
and lamp sockets can be combined
freely.
s&IXTHEACTUATORINTHEFRONTPANEL
with the ring nut.
s3NAPTHEINDIVIDUALELEMENTS
(amaximum three contact blocks
or two contact blocks together with
a lamp socket) in the coupling. You
can install them on any assembling
axis.
s)NSERTTHELAMPOR,%$INTOTHELAMP
socket.
s3NAPTHECOUPLINGWITHTHECONTACT
blocks on to the actuator.
s#ONNECTTHECABLES
s$ISASSEMBLYISPERFORMEDINRE-
verse order. To remove the coupling
from the actuator, the latch lever
must be pressed (by hand or with
a screwdriver).
Panel cut-out according to
)%#
All actuators are provided with a
locating lug which may be removed
using a screwdriver for installation
into mounting holes if required.
7ITHAGRIDSPACINGOFMM
HORIZONTALLYANDMMVERTICALLYTHE
collars of the square actuators touch
each other. We recommend to use the
same grid spacing also for the round
COLLARSHAPES)%#
50.00
30.00
3EQUENCEOFASSEMBLYDISASSEMBLYATSCREWSPRINGTYPE
and quick connect terminal
Assembly Disassembly
46.00
10.00
49.90
30.00
10.00
39.50
56.40
1 ... 6
RAFIX 22 QR
#ONTROLCOMPONENTS 
2
RAFIX
22 QR
Dimensional drawing