INSTRUCTION MANUAL Specifications Width: 7” (178mm) Depth: Height: 4.8” (124mm) 4” (102mm) Battery: 250mAh 3.7V LiPo Weight: 1.4 oz.
If you’re ready for a unique RC flying experience, the RageTM X-Fly VTOL is the aircraft for you. In addition to typical 4-channel drone control, the X-Fly is capable of high alpha flight like an aircraft thanks to software that allow pilots to fly at either 200 or 350 angles of attack. It also includes features like one-touch take-off and landing, altitude hold, and dual rates that allow you to fly with control speed that matches your skill level.
Install Transmitter Batteries Use a screwdriver to open the battery compartment. Then insert three AAA batteries, matching the polarities (+ and -) marked inside. Use alkaline batteries for optimal performance. Replace the cover and screw it in place. Install Flight Battery 1. Remove the battery cover. 2. Plug fully charged Lipo flight battery into the connector 3. Fit the battery into the compartment. 4. Reinstall the battery cover. Controller Instructions . 1.
5. Forward/Backward Trim: If the X-Fly tends to move forward, press the Backward Trim button several times until the X-Fly no longer moves forward on its own. Press the Forward Trim button if it flys backward on its own. 6. Left/Right Trim: If the X-Fly drifts right, press the left trim button; if it drifts left, press the right trim button. 7. Dual Rates: Press the right stick inward to change from low to high rate. The controller will beep twice.
Limited Warranty Warranty Period: Rage R/C warrants that the X-Fly (“Product”) will be free from original factory defects in materials and workmanship upon purchase (“Warranty Period”).
2017 HRP Distributing, Inc
