Datasheet

GR5630-WSB3
External RAID system for 4x 3.5" SATA HDDs, RAID 5
RaidSonic
RaidSonic Technology GmbH • Kurt-Fischer-Straße 50 • 22926 Ahrensburg / Germany
Telefon: [phone] – 468 900 (Vertrieb) • Fax: [phone] – 468 901 • www.raidsonic.de
Offers and deliveries are only done under our General Terms and Conditions. Errors and omissions excepted.
STORAGE SOLUTIONS WITHOUT LIMITS
Raid level RAID 5
Auto rebuilding Yes
Hot Swap Yes
Plug & Play Yes
Display RAID status, rebuilding status,
HDD failure
Button Mute, 2x Select button,
Fan (Smart Fan/Full speed Mode)
LED Power, Alarm (no HDD,
overheating, fan failure),
HDD status (Boot,
no HDD, HDD failure,
rebuilding, format, access)
Alarm Visual (no HDD, fan failure
and overheating),
acoustic (fan failure and overheating)
Fan 1x 80x80 mm, 1x 40x40 mm
Lock No
Power switch Yes
Power connector Interal power supply: AC: 100-240 V, 200 W
Technical data
Model GR5630-WSB3
Article No. 12234
EAN code 4711132864007
Brand RAIDON
Colour Black
Material Aluminium
Article text External RAID system for
4x 3.5" SATA HDDs
Processor Oxford 936QSE
Operating system OS independent
HDD interface 4x 3.5" SATA
HDD capacity 4x up to 2 TB
HDD height Standard
External data interface 1x eSATA, 1x USB 3.0,
2x FireWire 800
Transfer rate eSata up to 3 Gbit/s
USB 3.0 up to 5 Gbit/s
FireWire 800 up to 800 Mbit/s
User interface No
Key features
• Aluminium enclosure for 4x 3.5" SATA HDDs
• Trippel Host 1x eSATA + 1x USB 3.0 + 2x FireWire 800
• Automatic RAID 5 initialization, no setup needed
• LCD shows the RAID status
• LED on every HDD tray show the HDD status
• Buzzer alarm for overheating (> 60° C) and fan failure
(Buzzer can be shut to mute via button)
• Red LED for no HDD, overheating and fan failure (by mute modus)
• Supports all OS Sytems: Window/Mac/Linux
• Smart 8 cm fan, controled by temperature
• Hot Swap
Self-Starting
RAID 5 is preset. As soon as you have put in the HDDs the RAID starts. You may not set up the RAID. RAID 5 means, one HDD is used to
secure the data stored on the other HDDs. In the case of a failure of one HDD you only have to replace this one and the RAID restores the
lost data.