Operating instructions

34
RailKing E-8 AA Operating Manual
PROTOSOUND RESET FEATURE CHART
The following chart lists the available features found in your ProtoSound
equipped locomotive. The default settings for each feature as well as the
operation sequence of the feature are listed in separate columns. You can
reset all features to their original factory settings by accessing Feature 18 in
RESET and press and hold the transformer whistle button until you hear a
soft, warbled bell sound.
RESET # OPERATION DEFAULT CLANKS/CLINKS
6 Engine Volume Full Volume 1 Clank/5 Clinks
10 Coupler ON/OFF Coupler ON 2 Clanks/0 Clinks
18 Reset Default Settings 3 Clanks/3 Clinks
20 Remote Bell Button Bell Button Active 4 Clanks/0 Clinks
23 Cab Chatter Cab Chatter ON 4 Clanks/3 Clinks
25 Whistle In Neutral Whistle In Neutral OFF 5 Clanks/0 Clinks
27 Chuff Rate Full Chuff Range 5 Clanks/2 Clinks
28 Brake/PFA Enabled Brake/PFA ON 5 Clanks/3 Clinks
40 Lockout Enabled Lockout OFF 8 Clanks/0 Clinks
45 Squeaking Brakes Brakes Always ON 9 Clanks/0 Clinks