RB5423-6 LD POP Flip Book Tabs 3/1/05 WHYThe Landscape Dripline System is better 5:23 PM Page 1
RB5423-6 LD POP Flip Book 3/1/05 5:16 PM Page 4 WHERE Are You Watering? Watering Solutions at a Glance See following pages for typical applications Ideal for: Vegetable Gardens Solution: 1/2” Emitter Tubing Place in rows Spot Watering Emitters Add near larger plants
RB5423-6 LD POP Flip Book 3/1/05 5:16 PM Page 5 Widely Spaced Plants Landscape Areas Solution: Solution: Spot Watering Emitters Place at each plant 1/2” Emitter Tubing Use in larger areas 1/4” Emitter Tubing Extend watering to narrow planting areas Spot Watering Emitters Apply to trees and large shrubs Patio Plants Solution: Spot Watering Emitters Place in each planter 1/4” Emitter Tubing Use in larger planters The faster, smarter way to drip irrigate
RB5423-6 LD POP Flip Book 3/1/05 5:16 PM Page 6 WHERE Are You Watering? Vegetable Garden To water closely spaced plants in a vegetable garden, use 1/2” Emitter Tubing connected as a grid spaced 18" apart. In this approach, your Landscape Dripline System soaks the entire area. Use Spot Watering Emitters, with 1/4" Tubing and 1/4" Tubing Stakes, to add extra watering for plants located outside the grid.
RB5423-6 LD POP Flip Book 3/1/05 5:17 PM Page 7 WHAT YOU NEED Water Connections Faucet Connection Kit FCKIT-1PK Suggested Quantity: 1/2” Elbows BE50-4PK 1 per zone Connect system to any outdoor faucet OR Riser Connection Kit RCKIT-1PK Fittings and Tools Convert an 1800™ spray head or a riser to a drip zone Connect 2 pieces of 1/2” tubing Tubing 1/2” Tees BT50-4PK Connect 3 pieces of 1/2” tubing in a “T” shape ET63918-100 2-4 per 50 ft of 1/2” tubing (avg.
RB5423-6 LD POP Flip Book 3/1/05 5:17 PM Page 8 WHERE Are You Watering? Widely Spaced Plants Insert Spot Watering Emitters into the 1/2” tubing which leads from your water source. These Spot Watering Emitters regulate flow at 1.0 or 2.0 gallons per hour (GPH). To complete your layout, simply attach short lengths of 1/4” Tubing to the Spot Watering Emitters and stake near the base of each plant.
RB5423-6 LD POP Flip Book 3/1/05 5:17 PM Page 9 WHAT YOU NEED Water Connections Faucet Connection Kit FCKIT-1PK Suggested Quantity: 1 per zone Connect system to any outdoor faucet 1/4” Barbed Couplings BC25-10PK Connect 2 pieces of 1/4” Tubing or Emitter Tubing OR Riser Connection Kit RCKIT-1PK Fittings and Tools 1 per zone Spot Watering Emitters SW10-10PK or SW20-10PK Add supplemental watering to individual plants Convert an 1800™ spray head or a riser to a drip zone 1/4” Tubing Stakes TS25-1
RB5423-6 LD POP Flip Book 3/1/05 5:20 PM Page 10 WHERE Are You Watering? Landscape Areas Use a combination of Emitter Tubing and Spot Watering Emitters to reach all areas of your planting bed. For closely spaced plants such as ground covers, use 1/2” Emitter Tubing connected in a grid pattern. The recommended spacing between 1/2" Emitter Tubing runs is 18” to 24”. Extend irrigation to narrow planting areas using 1/4" Emitter Tubing.
RB5423-6 LD POP Flip Book 3/1/05 5:20 PM Page 11 WHAT YOU NEED Fittings and Tools 1/2” Elbows BE50-4PK Water Connections Faucet Connection Kit FCKIT-1PK Suggested Quantity: 1 per zone Connect system to any outdoor faucet OR Riser Connection Kit RCKIT-1PK 1/2” Couplings BC50-4PK Connect 2 pieces of 1/2” tubing Use with 1/2” tubing to allow flushing and draining of system 1/2” Tees BT50-4PK Tubing 1/2” Emitter Tubing 1/4” Barbed Couplings BC25-10PK 2-4 per 50 ft of 1/4” tubing (avg.
RB5423-6 LD POP Flip Book 3/1/05 5:20 PM Page 12 WHERE Are You Watering? Patio Plants Depending upon the size of your plants and containers, your patio watering system may consist of 1/4” Emitter Tubing or Spot Watering Emitters placed directly on top of the potting soil. Run 1/4” Tubing from the main 1/2” Tubing. For larger plants, use 1/4” Emitter Tubing in a loop around the plant. For smaller plants, use 1/4” Tubing and 1/4" Tubing Stakes to direct water at the base of each plant.
RB5423-6 LD POP Flip Book Tabs 3/1/05 5:24 PM Page 3 WHAT YOU NEED Water Connections Faucet Connection Kit FCKIT-1PK Fittings and Tools Suggested Quantity: Connect 2 pieces of 1/4” Tubing or Emitter Tubing 1/4” Barbed Tees 1 per zone Connect system to any outdoor faucet OR Riser Connection Kit RCKIT-1PK 1/4” Barbed Couplings BC25-10PK 1 per zone BT25-10PK Connect 3 pieces of 1/4" tubing in a “T” shape or tap into the side of 1/2" tubing Spot Watering Emitters SW10-10PK or SW20-10PK Add suppleme
