User manual

STPi Controller Operation Manual
16
Programming Chart
Zone Zone Description
Run
Time
(Max 240 min.)
Watering Days
(circle days that apply)
* Start Time #1
(15 min. increments)
Total Start
Times
(circle no. of starts)
1
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
2
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
3
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
4
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
5
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
6
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
7
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
8
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
9
___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
Note: A total of 4 start times can be assigned for each zone (this can be helpful for zones irrigating tight soils and slopes).
* Start Time Sequence (hours after first programmed start time)
No. of Start Times 1st Start Time 2nd Start Time 3rd Start Time 4th Start Time
One Time as programmed n/a n/a n/a
Two Times as programmed 6 hours n/a n/a
Three Times as programmed 4 hours 8 hours n/a
Four Times as programmed 3 hours 6 hours 9 hours
Example: If the first start time for Zone 1 is programmed for 8:00 AM and the user has selected THREE TIMES, then the
second start time will be at 12:00 PM and the third start time will be at 4:00 PM.
637418-01 Rev B (STP user manual) source.indd 16 3/7/2008 5:24:11 PM