User manual

STPi Controller Operation Manual
2
Controller Functions
The diagram below shows the controls and displays for your new
Controller. Use this to become familiar with the Controller functions.
NOTE: Always begin by turning the dial to the position you want to make a change to and then make your changes
!
using the options and information displayed to the right of the dial. For example, if you want to set a schedule for
Zone 1 in your yard, first turn the dial to “1” and then make your changes using the buttons to the right and below the
display screen.
OFF
Turns off
ALL watering
AUTO
Set dial here to run your
programmed settings
SET CLOCK
Set current
time of day
SET DATE
Set current date
DISPLAY
SCREEN
RAIN DELAY
Delays watering
up to 72 hours
ADJUST WATER
Adjusts watering
amount (%) as
seasons change
ZONES 1-9
Program watering
for each zone (4 Zone
model shown)
WATER NOW
Manually waters
any zone
WATERING DAYS
Select which day(s)
the displayed zone
is watered
ZONE OFF
Shuts off the
displayed watering
zone
WATERING TIMES
Select how many
times per day the
displayed zone is
watered
UP/DOWN
ARROWS
Use UP/DOWN
arrows on left or
right to set time,
date, run time,
start time, etc.
637418-01 Rev B (STP user manual) source.indd 2 3/7/2008 5:23:56 PM