Full Product Manual

10
Options and Special
Features
Rain Delay
Watering schedules can be delayed manually for up
to 14 days due to rain or other needs. While rain delay
is enabled no scheduled watering will take place for
any zones. The WATER NOW feature can still be used.
After the immediate watering is complete from a
WATER NOW session the rain delay feature will
resume for the programmed number of days.

During normal operation, AUTO has been
pressed,
Press and hold the
+
button.
The number 01 will appear on the screen along
with the stop icon.
This means the rain delay has been enabled for
1 day.

To increase or decrease the rain delay
press
+
or
–
.
To turn o the rain delay press
–
until the days
of rain delay turns to 0.
After the rain delay days are completed the
watering schedule will resume.
Copy Zone to Zone
Scheduling information can be copied from one
zone to another zone to speed up programming.

Press the SCHEDULE button.

Press
+
or
–
to select the SUBSEQUENT Zone
number.

Press and hold BACK, then press and release
the SCHEDULE button.
4d Cyclic Days

Press
+
or
–
to select Cyclic Days; then press
NEXT.
NOTE: If any settings for Day Cycle or Start Date
have already been entered for previous zones,
those values will be shown on the display.

Press
+
or
–
to set the desired Day Cycle; then
press NEXT.

Press
+
or
–
to set desired Start Date;
then press NEXT.
NOTE: The Start Date should be the rst day the
zone is to be watered. Only Start Dates that fall
within the selected Day Cycle are available.
REPEAT Steps 1-4 for remaining zones.
DAY
CYCLE
START
DATE