Full Product Manual

7
App Programming
Search and download the Rain Bird App, available in
both the Apple App Store for iPhone and Google Play
store for Android.
Activate Hotspot
Verify WiFi Module is ready to connect
If the module is alternating blinking green and red,
proceed to next step. If blinking red only, press button
on the WiFi module to broadcast WiFi signal.
LIGHT FLASHES: BROADCASTING WIFI
Red Only NO
Alternating
Red & Green
YES
Green Only NO (connected to router)
3 Quick Green ashes can occur at two dierent
times:
When the WiFi module is rst installed in the
accessory port - this means the WiFi module
communicated successfully with the timer
When the App is connecting to a WiFi signal - this
means there has been a successful connection.
Launch the Rain Bird App
Follow the App Setup Wizard to enter information
about your yard and create an initial watering schedule.
Programming at the timer
Date-Time
Set the current calendar Date and Time of day.

Press the DATE-TIME button.

Press
+
or
–
to set the month (M); then press
NEXT.
Repeat above step to set the day (D) and year
(YYYY).

Press
+
or
–
to set the hour (ensuring that
AM/PM setting is correct); then press NEXT.

Press
+
or
–
to set the minutes; then press
AUTO.
NOTE: Two AAA batteries can be installed to
retain date and time in the event of a power
outage. See “Install Batteries” for details.
MD
YYYY
AM
MD
YYYY
AM
TIME
DATE
100%4:21 PM
Help/Support
Add Controller
Tap Add Controller to begin
Help/Support
Add Controller
Tap Add Controller to begin
For additional
information on
programming
the timer through
the app, refer to
videos found at
wi.rainbird.com.