Installation Guide

1/2” Tubing T63-100
Run water to 1/2” Emitter Tubing
1/2” Emitter Tubing
ET63918-100
Place in planting areas
1/4” Tubing T22-50
Use with Spot Watering Emitters or to run
water to 1/4” Emitter Tubing
The faster, smarter way to drip irrigate
Suggested Quantity:
Suggested Quantity:
1 per zone
1 per zone
100 ft. coil
100 ft. coil
50 ft. coil
Fittings and Tools
Water Connections
Tubing
Faucet Connection
Kit
FCKIT-1PK
Connect system to any outdoor faucet
Riser Connection
Kit
RCKIT-1PK
Convert an 1800™ spray head or a riser to
a drip zone
OR
WHAT YOU NEED
1/4” Barbed
Couplings
BC25-10PK
Connect 2 pieces of 1/4” Tubing or Emitter Tubing
Spot Watering
Emitters
SW10-10PK or SW20-10PK
Add supplemental watering to individual plants
1/4” Tubing
Stakes
TS25-10PK
Stake 1/4” tubing or secure Spot Watering emitters
Galvanized Stakes
GS50-10PK
Secure 1/4” tubing to the ground
Emitter Tool ET-1PK
Simplifies adding or removing Spot Water Emitters,
1/4” fittings and plugs
2-4 per 50 ft of
1/4” tubing (avg.)
1 per small plant,
2-3 per large plant
10 per 50 ft of
1/4” tubing
10 per 50 ft of
1/2” tubing
1
1/2” End Closure EC50-2PK
Use with 1/2” tubing to allow flushing and
draining of system
1 per zone
1/4” Barbed Tees
BT25-10PK
Connect 3 pieces of 1/4" tubing in a “T” shape or
tap into the side of 1/2" tubing
2-4 per 50 ft of
1/4” tubing (avg.)
WHERE
Are You Watering?
RB5423-6 LD POP Flip Book Tabs 3/1/05 5:24 PM Page 3