Use and Care Manual

RECOMMENDED USES:
 Bare wood
 Concrete
 EFIS or cement plaster
 Masonry block
 Oil, gas, and brake fluid repellent
 Stucco
 Grout Additive
 Surface primer for paint
May be used on composite construction with a variety of
substrates.
An excellent primer for paint applications
Use on both horizontal and vertical surfaces
COVERAGE RATES (THEORETICAL):
Substrate Sq Ft/ Gallon
CMU Precision Block 60-70
Split Face 50-70
Scored/Fluted 65-80
Lightweight 40-55
Clay Brick 125-150
Stucco 100-150
Dense Masonry Surfaces 125-150
Adobe Block 70-90
Wood 150-200
EFIS 80-120
Concrete Curing 250
Horizontal Concrete 300
Special Considerations:
 Use of fluted or scored block or raked joints will increase surface
areas by 20%-30% or more and decrease coverage rates. Allow
for this increased surface area when determining material require-
ments.
 Extremely porous surfaces may require multiple coats.
Warranty Period: Available in 10 or 20 Year
CSI Reference: Division 3, 4, 7 & 9
RTU= Ready To Use CONC= Concentrate
Part Numbers: USA International
1 Gallon-RTU CR-0356 CR-0356-CA
5 Gallon-RTU CR-0357 CR-0357-CA
55 Gallon-RTU CR-0358 CR-0358-CA
1 Gallon-CONC CR-0701 CR-0701-CA
5 Gallon-CONC CR-0705 CR-0705-CA
ECO-Pod™-CONC CR-0359 CR-0359-CA
MICRO-SEAL
™
SILANE/SILOXANE with MICRO-LOK
™
100% PENETRATING WATER REPELLENT
PRODUCT DESCRIPTION
MICRO-SEAL Ready To Use is a solvent-free, 100% active solid, silane/
siloxane repellent. MICRO-SEAL self-emulsifies to form a high-
performance and deep-penetrating, alkali-resistant water-repellent
emulsion. When applied, MICRO-SEAL forms a long-chain water-repellent
barrier deep within the masonry surface. This hydrophobic barrier
repels water, yet remains highly vapor-permeable and allows moisture
to escape. MICRO-SEAL performance is not affected by weathering, UV
light, or wind-driven rain.
MICRO-LOK creates a micro-molecular chemical and mechanical bond
between the water-repellent chemicals and the substrate. MICRO-SEAL
penetrates deep into porous masonry surfaces to provide long-lasting
and virtually indestructible water-repellent protection that is not affect-
ed by weather or sunlight. Helps prevent spalling, and cracking caused
by freeze/thaw cycles. Helps prevent chloride ion intrusion and efflo-
rescence.
PRODUCT FEATURES
 Exclusive MICRO-LOK formulation
 Mold and mildew inhibitor
 Will provide some graffiti protection—two coats required
 Protection not affected by weathering or UV light
 Single or multiple coat application
 V.O.C. compliant
 Contains no known carcinogens
 Breathable – does not trap moisture
 Can be used in cold temperature applications
 Meets Master Painters Institute (MPI) #34 & #117
 Meets ASTM C309, Type 1 Class A & B for curing compounds
 Can be used on surfaces containing a block admixture such as Dry-
Block®
 Will NOT yellow or turn cloudy
 UV protectant
CR-0360
32 oz. Quart CONC
CR-0360-CA