Use and Care Manual

ManualsBrandsRAIN GUARD ManualsBuilding materialsBlok-Lok 6 oz. Super Concentrate Eco-Pod Penetrating Water Repellent

RECOMMENDED USES:

 Bare wood

 Brick

 Concrete

 Curing compound for vertical applications

 EFIS or cement plaster

 Masonry block

 Stucco

COVERAGE RATES (THEORETICAL):

Substrate Sq Ft/ Gallon

CMU Precision Block 60-70

Split Face 50-70

Scored/Fluted 65-80

Lightweight 40-55

Clay Brick 125-150

Stucco 100-150

Dense Masonry Surfaces 125-150

Wood 150-200

Clay Block 50-60

EFIS 80-120

Concrete Curing 250

Special Considerations:

 Use of fluted or scored block or raked joints will increase

surface areas by 20%-30% or more and decrease cover-

age rates. Allow for this increased surface area when de-

termining material requirements.

 Extremely porous surfaces may require multiple coats.

Warranty Period: Five Years

CSI Reference: Division 3, 4, 7 & 9

RTU= Ready To Use CONC= Concentrate

Part Numbers: USA International

1 Gallon-RTU CR-0201 CR-0201-CA

5 Gallon-RTU CR-0205 CR-0205-CA

55 Gallon-RTU CR-0255 CR-0255-CA

1 Gallon-CONC CR-0601 CR-0601-CA

ECO-Pod™-CONC CR-0607 CR-0607-CA

BLOK-LOK

™

SILANE/SILOXANE with MICRO-LOKTM

100% PENETRATING

WATER REPELLENT

PRODUCT DESCRIPTION

Rainguard BLOK-LOK with MICRO-LOK Clear Water Repellent is a water-

based, silane/siloxane repellent composed of high-quality chemical solids,

blended to create a clear, deep-penetrating, and non-film-forming chemi-

cally-reactive masonry water repellent that contains no silicone oils,

paraffin wax, or urethanes.

MICRO-LOK creates a micro-molecular chemical and mechanical bond

between the water-repellent chemicals and the substrate. BLOK-LOK

penetrates deep into porous masonry surfaces to provide long-lasting

and virtually indestructible water-repellent protection that is not affect-

ed by weather or sunlight. Helps prevent spalling and cracking caused by

freeze/thaw cycles. Helps prevent chloride ion intrusion and efflo-

rescence.

BLOK-LOK provides superior grade, heavy-duty water-repellent perfor-

mance on a wide variety of vertical surfaces.

PRODUCT FEATURES

 Exclusive MICRO-LOK formulation

 Mold and Mildew Inhibitor

 Protection not effected by weathering or UV light

 Single or multiple coat application

 V.O.C. compliant

 Contains no known carcinogens

 Cures concrete faster - Shortens job cycle time

 Breathable – does not trap moisture

 Can be used in cold temperature applications

 Meets Master Painters Institute (MPI) #34 - Water Repellent

 Will not yellow or turn cloudy

Can be used on surfaces block admixture such as Dry-Block



UV protectant



CR-0608

CR-0608-CA

32 oz. Quart CONC

Summary of content (2 pages)

PAGE 1
BLOK-LOK ™ SILANE/SILOXANE with MICRO-LOKTM 100% PENETRATING WATER REPELLENT Warranty Period: Five Years CSI Reference: Division 3, 4, 7 & 9 RTU= Ready To Use CONC= Concentrate Part Numbers: USA International 1 Gallon-RTU CR-0201 CR-0201-CA 5 Gallon-RTU CR-0205 CR-0205-CA 55 Gallon-RTU CR-0255 CR-0255-CA 1 Gallon-CONC CR-0601 CR-0601-CA ECO-Pod™-CONC CR-0607 CR-0607-CA CR-0608-CA 32 oz.
PAGE 2
PRECAUTIONS & LIMITATIONS All surfaces to be coated should be clean of any dirt and grime, efflorescence, lime run, form oils and release agents, grease, mud, excess mortar, and mold and mildew, etc. All cracks should be pointed or caulked. All voids, bee holes, masonry surface defects, and openings such as conduits, pipes, drains, door frames, vents, air conditioner openings, electrical openings, control joints, or any dissimilar materials should be repaired using urethane or other approved patching.