Instructions / Assembly

ManualsBrandsRAIN GUARD ManualsBuilding materialsBlok-Lok with Graffiti Control 1 gal. Concentrate Repellent with Graffiti Protection

RECOMMENDED USES:

 Bare wood

 Brick

 Concrete

 EFIS or cement plaster

 Masonry block

 Stucco

 Porous stone

 Unglazed tile

COVERAGE RATES (THEORETICAL):

All Substrates___ Sq Ft/ Gallon

First Coat 50

Second Coat 100

Special Considerations:

 Use of fluted or scored block or raked joints will in-

crease surface areas by 20%-30% or more and de-

crease coverage rates. Allow for this increased sur-

face area when determining material requirements.

 Extremely porous surfaces may require multiple

coats.

USA International

CR-0609 CR-0609-CA

CR-0610 CR-0610-CA

CR-0611 CR-0611-CA

BLOK-LOK

™

with Graffiti Control

READY TO USE SILANE/SILOXANE

with MICRO-LOKTM

PENETRATING GRAFFITI AND WATER REPELLENT

PRODUCT DESCRIPTION

Rainguard BLOK-LOK with Graffiti Control is a water-based, silan-

e/siloxane graffiti & water repellent that combines high-quality

penetrating chemical solids with an acrylic surface treatment com-

ponent, to create a clear, deep-penetrating, and non-film-forming

chemically-reactive masonry water repellent that contains no sili-

cone oils, paraffin wax, or urethanes.

MICRO-LOK creates a micro-molecular chemical and mechanical

bond between the water-repellent chemicals and the substrate.

BLOK-LOK penetrates deep into porous masonry surfaces to pro-

vide long-lasting and virtually indestructible water-repellent pro-

tection that is not affected by weather or sunlight. The acrylic

surface component make graffiti easy to remove with Rainguard’s

VandlClean Super.

BLOK-LOK provides superior grade, heavy-duty graffiti and

water-repellent performance on a wide variety of vertical

surfaces.

PRODUCT FEATURES

 Exclusive MICRO-LOK formulation

 Mold and Mildew Inhibitor

 Protection not effected by weathering or UV light

 Single product provide protection against water and graffiti

 V.O.C. compliant

 Contains no known carcinogens

 Does not darken surfaces

 Breathable – does not trap moisture

 Can be used in cold temperature applications

CR-0612

CR-0614

Warranty Period:

CSI Reference:

RTU=Ready to Use

Part Numbers:

1 Gallon RTU

5 Gallon RTU

55 Gallon RTU

32 oz Super Conc

1 Gallon Conc

10 years Water Repellent

2 years Graffiti Protection

Division 3, 4, 7 & 9

Conc-Concentrate

Summary of content (2 pages)

PAGE 1
BLOK-LOK ™ with Graffiti Control READY TO USE SILANE/SILOXANE with MICRO-LOKTM PENETRATING GRAFFITI AND WATER REPELLENT PRODUCT DESCRIPTION Rainguard BLOK-LOK with Graffiti Control is a water-based, silane/siloxane graffiti & water repellent that combines high-quality penetrating chemical solids with an acrylic surface treatment component, to create a clear, deep-penetrating, and non-film-forming chemically-reactive masonry water repellent that contains no silicone oils, paraffin wax, or urethanes.
PAGE 2
PRECAUTIONS & LIMITATIONS All surfaces to be coated should be clean of any dirt and grime, efflorescence, lime run, form oils and release agents, grease, mud, excess mortar, and mold and mildew, etc. All cracks should be pointed or caulked. All voids, bee holes, masonry surface defects, and openings such as conduits, pipes, drains, door frames, vents, air conditioner openings, electrical openings, control joints, or any dissimilar materials should be repaired using urethane or other approved patching.