MSDS

MATERIAL SAFETY DATA SHEET
PRODUCT NAME: Rainguard™ Plugger 10™
Product Codes: CR-1501, CR-1501-CA, CR-1505, CR-1505-CA
3
appropriate chemical waste containers for proper disposal. Persons performing clean up should wear
adequate personal protective equipment and clothing. Keep out of storm drains, sewers and
waterways. Observe all local, state and federal laws and regulations regarding spills, clean-up,
removal, discharge and disposal.
SECTION VII - HANDLING AND STORAGE
Keep containers tightly closed when not in use. Do not store or handle near heat source, sparks, open
flame or strong oxidizing materials. Use and store in only in cool and well-ventilated areas. Care should
be taken to prevent moisture condensation in the container. Avoid breathing vapors. Avoid contact
with skin. Keep out of the reach of children.
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
The recommendations described in this section are provided as general guidance for minimizing
exposure when handling this product. Because use conditions will vary depending upon customer
applications, specific safe handling procedures should be developed by a person knowledgeable of
the intended use, working conditions and equipment.
RESPIRATORY PROTECTION: Use in a well ventilated and/or open area.
VENTILATION: Local exhaust and or mechanical ventilation in confined or
poorly ventilated spaces are recommended.
PROTECTIVE GLOVES: Wear neoprene or non-soluble plastic gloves.
EYE PROTECTION: Use approved splash goggles.
PROTECTIVE CLOTHING: Wear long sleeve clothing selected for condition exposure
potential.
INDUSTRIAL HYGIENE: Before eating or smoking, wash hands and face to remove
residual contamination.
EXPOSURE LIMITS:
Chemical name CAS Number Regulation Limit Form
SECTION IX – PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT: 212°F SPECIFIC GRAVITY (H20 = 1): 1.03
VAPOR DENSITY (AIR =1): Not determined EVAPORATION RATE (ETHER = 1): Not
determined