Instructions / Assembly

ManualsBrandsRain Guard ManualsBuilding materialsClear-Seal 1-gal. Surface High Gloss Urethane Sealer

RECOMMENDED USES:

 Brick

 Concrete

 EFIS or cement plaster

 Masonry block

 Stucco

 Wood

 Clear protection on murals or painted vertical surfaces

 Clear sealer for painted or unpainted surfaces

 Repellent of oil, gas, and other fluids

COVERAGE RATES (THEORETICAL):

Substrate Sq Ft/ Gallon

Porous Surfaces 200-300

Dense Surfaces 300-400

Special Considerations:

 The coverage will vary with the porosity of the substrate. If

the substrate is very porous, coverage will be reduced

 Use of fluted or scored block or raked joints will increase

surface areas by 20%-30% or more and decrease cover-

age rates. Allow for this increased surface area when de-

termining material requirements.

 Extremely porous surfaces may require multiple coats.

Warranty Period: Five Years

CSI Reference: Divisions 7 & 9

HG= High Gloss LG= Low Gloss

Part Numbers USA International

1 Gallon- HG CU-0101 CU-0101-CA

5 Gallon- HG CU-0105 CU-0105-CA

1 Gallon- LG CU-0201 CU-0201-CA

5 Gallon– LG CU-0205 CU-0205-CA

CLEAR-SEAL

™

High & Low

Gloss Acrylic Urethane

Sealer

PRODUCT DESCRIPTION

Rainguard CLEAR-SEAL Acrylic Urethane Sealer is a single-component,

self-cross-linking urethane/acrylic sealer and finish coat for decorative

concrete, stone, and other masonry surfaces. CLEAR-SEAL, a water-

based, low-VOC, low-odor coating can protect your masonry against

chemical spills and staining agents, UV light, and wear due to heavy foot

and tire traffic.

CLEAR-SEAL is formulated for use on horizontal or vertical painted or

unpainted concrete and wood surfaces. It may be used as a clear sealer

on commercial, warehouse, or industrial floors, residential or commer-

cial garage spaces, brick pavers, or other masonry surfaces.

PRODUCT FEATURES

 Impact and wear resistant

 Resists hot tire pick-up

 Non-yellowing formulation

 Resistant to stains, acids, bases, gasoline, alcohol and oil (vegetable

and motor)

 Low odor

 Non-hazardous

 Resists UV rays

 Environmentally-friendly

 Water clean-up

 Excellent adhesion

 Fast dry time and cure time

 No pot-life issues – one component self-cross-linking system

Summary of content (2 pages)

PAGE 1
CLEAR-SEAL™ High & Low Gloss Acrylic Urethane Sealer PRODUCT DESCRIPTION Rainguard CLEAR-SEAL Acrylic Urethane Sealer is a single-component, self-cross-linking urethane/acrylic sealer and finish coat for decorative concrete, stone, and other masonry surfaces. CLEAR-SEAL, a waterbased, low-VOC, low-odor coating can protect your masonry against chemical spills and staining agents, UV light, and wear due to heavy foot and tire traffic.
PAGE 2
HOW TO USE & PRECAUTIONS: TECHNICAL DATA: All surfaces to be coated should be clean of any dirt and grime, efflorescence, lime run, form oils and release agents, grease, mud, excess mortar, and mold and mildew, etc. All cracks should be pointed or caulked.