MSDS

MATERIAL SAFETY DATA SHEET
Rainguard™ Clear-Seal™ High Gloss Acrylic Urethane Sealer
CU-0101, CU-0101-CA, CU-0105, CU-0105-CA
PRODUCT NAME:
Product Codes:
2
SECTION IV – FIRST AID MEASURES
Get immediate medical attention for any significant overexposure
INHALATION: Move victim to fresh air. If victim has difficulty breathing, administer oxygen.
If breathing has stopped, initiate CPR. Seek immediate medical attention.
INGESTION: Never give an unconscious person anything to drink. If conscious, treat for
shock. Seek immediate medical assistance or nearest poison control center. If conscious, induce
vomiting. If unconscious and vomiting, turn the victim on their side to avoid choking.
SKIN CONTACT: Wash exposed areas with soap and water. Remove contaminated clothing and
shoes. Wash contaminated clothing before reuse.
EYES: Flush eyes with running water for at least 15 minutes. Hold eyelids apart to
insure rinsing of the entire surface of the eye and lids with water. Seek
immediate medical attention.
CARCINOGENICITY: NTP: No
IARC Monographs: No
OSHA Regulated: No
SECTION V – FIRE/EXPLOSION HAZARDS
FLASH POINT: None
METHOD Not applicable
LOWER EXPLOSION LIMIT: Not available
UPPER EXPLOSION LIMIT: Not available
AUTOIGNITION TEMPERATURE: Not available
EXTINGUISHING MEDIA: CO2, dry chemical or water fog.
HAZARDOUS COMBUSTION PRODUCTS: Carbon monoxide and carbon dioxide can form. Smoke,
fumes
PROTECTIVE EQUIPMENT FOR FIREFIGHTERS: Use accepted fire fighting techniques. Wear full
firefighting protective clothing, including self-
contained breathing apparatus (SCBA). If water is
used, fog nozzles are preferable. Use water to cool
closed containers.
FIRE AND EXPLOSION CONDITIONS: This product not expected to ignite under normal
conditions of use.
SECTION VI - SPILLS/LEAKS/ACCIDENTAL RELEASE MEASURES
Remove and eliminate all ignition sources. Control the source of the spill. Ventilate confined spaces.
Avoid breathing vapors or mist. Dike and soak up spill with absorbent material such as sand or