Instructions / Assembly

ManualsBrandsRAIN GUARD ManualsBuilding materialsVandlSystem 1-gal. VandlGuard Non-Sacrificial Anti-Graffiti Coating

RECOMMENDED USES:

 Aggregate panels

 Concrete, brick, or stucco

 EFIS and cement plaster

 Metal

 Over water-based and solvent-based coatings

 Plastic

 Previously or newly-painted surfaces.

 Stone

 Wood

COVERAGE RATES (THEORETICAL):

Porous Surfaces Square Feet

Per Coat Per Gallon

Precision Block 200

Split Face Block 200

Ground Face Block 200

Scored/Fluted Block 180

Sand Blasted Block 180

Slump/Adobe Block 200

Heavy Textured Stucco 200

Brick 250

Unpainted Wood 200

Porous Tile 200

Dense Surfaces

Per Coat

Fine/Medium Textured Stucco 250

Pre-Cast/Tilt-up Concrete 250

Cast Concrete 250

Sand Blasted Concrete 225

Exposed Aggregate 225

EFIS 225

Metal 300

Painted Surfaces 300

Warranty Period: Up to Ten Years

CSI Reference: Division 9

Part Numbers: USA International

1 Gallon VG-7001 VG-7001-CA

5 Gallon VG-7000 VG-7000-CA

VANDLGUARD

™

NON-SACRIFICIAL ANTI-GRAFFITI COATING

PRODUCT DESCRIPTION

VANDLGUARD Non-Sacrificial Anti-Graffiti Coating is a single-part system

that provides a tough and durable graffiti resistant finish. This is a cross-

linking co-polymer material coating that dries clear (non-yellowing) with a

low-luster sheen. Protects a variety of interior and exterior vertical sur-

faces from permanent graffiti staining and damage. Will protect your sur-

face from graffiti defacement caused by commercially available spray paints.

Features and Benefits of VANDLGUARD:

 Backed by the best warranty available on the market

 Supplied ready to use - no mixing needed

 V.O.C. compliant - less then 20 g/l

 Treated surfaces will sustain unlimited graffiti removals for a period up

to ten years

 Will retard the growth of mildew, mold, fungus, and bacteria

 Surfaces require no particular maintenance.

 No expensive sand blasting needed.

 Meets Master Painters Institute (MPI) #105 - Graffiti-Protection, Top

Coat

A COMPLETE SYSTEM

Bare Surfaces: First apply one coat of

MICRO-SEAL Water-Repellent

by Rainguard (required for

applications that need warranties

and substrate is unpainted or sealed)

Material Warranty Application Requirements

One Year Warranty Apply One Coat of VANDLGUARD

Five Year Warranty Apply Two Coats of VANDLGUARD

Ten Year Warranty Apply Three Coats of VANDLGUARD

For warranties that include labor, please refer to VANDLGUARD ONE,

VANDLGUARD FIVE and VANDLGUARD TEN systems.

Summary of content (2 pages)

PAGE 1
VANDLGUARD ™ Warranty Period: Up to Ten Years NON-SACRIFICIAL ANTI-GRAFFITI COATING CSI Reference: Division 9 PRODUCT DESCRIPTION Part Numbers: 1 Gallon 5 Gallon VANDLGUARD Non-Sacrificial Anti-Graffiti Coating is a single-part system that provides a tough and durable graffiti resistant finish. This is a crosslinking co-polymer material coating that dries clear (non-yellowing) with a low-luster sheen.
PAGE 2
HOW TO USE: GRAFFITI REMOVAL: All surfaces to be coated should be structurally sound, clean, and dry. In many instances, non-abrasive household cleaners safely and effectively remove tagging. However, in the event tagging can’t be removed with these cleaners, please contact manufacturer and purchase Rainguard VANDLCLEAN SUPER. Follow manufacturer’s recommendations and instructions for use. In addition, warm water power-washing has also been known to assist in the removal of tagging.