Instructions / Assembly

ManualsBrandsRAIN GUARD ManualsBuilding materialsVandlSystem 5-gal. VandlGuard One Non-Sacrificial Anti-Graffiti Coating

RECOMMENDED USES:

 Aggregate panels

 Concrete, brick, or stucco

 EFIS and cement plaster

 Metal

 Over water-based and solvent-based coatings

 Plastic

 Previously or newly-painted surfaces.

 Stone

 Wood

COVERAGE RATES (THEORETICAL):

Porous Surfaces Square Feet

One Coat Per Gallon

Precision Block 225

Split Face Block 225

Ground Face Block 225

Scored/Fluted Block 200

Sand Blasted Block 200

Slump/Adobe Block 225

Heavy Textured Stucco 250

Brick 250

Unpainted Wood 275

Porous Tile 250

Dense Surfaces

One Coat

Fine/Medium Textured Stucco 250

Pre-Cast/Tilt-up Concrete 275

Cast Concrete 275

Sand Blasted Concrete 250

Exposed Aggregate 275

EFIS 250

Metal 300

Painted Surfaces 300

Warranty Period: One Year

CSI Reference: Division 9

Part Numbers: USA International

1 Gallon VG-7003 VG-7003-CA

5 Gallon VG-7002 VG-7002-CA

VANDLGUARD ONE

™

NON-SACRIFICIAL ANTI-GRAFFITI COATING

PRODUCT DESCRIPTION

VANDLGUARD ONE Non-Sacrificial Anti-Graffiti Coating is a single

-coat product that provides a tough and durable graffiti-resistant

finish. This is a cross-linking co-polymer material coating that

dries clear (non-yellowing) with a low-luster sheen. Protects a

variety of interior and exterior vertical surfaces from permanent

graffiti staining and damage. Will protect your surface from graffiti

defacement caused by commercially available spray paints.

Features and Benefits of VANDLGUARD ONE :

 A single coat is all that’s needed

 Backed by the best warranty available on the market

 Supplied ready to use - no mixing needed

 V.O.C. compliant - less then 20 g/l

 Treated surfaces will sustain unlimited graffiti removals for a

period up to one year

 Will retard the growth of mildew, mold, fungus, and bacteria

 Surfaces require no particular maintenance. Damaged or

abraded areas are easily restored with an additional coat of

VANDLGUARD ONE

 No expensive sandblasting needed. Meets Master Painters

institute (MPI) #105 - Graffiti-Protection, Top Coat

 Treated surfaces can be re-coated with any Rainguard anti-

graffiti coating, or, with proper preparation, painted over

A COMPLETE SYSTEM

Bare Surfaces: First apply one coat of

MICRO-SEAL Water-Repellent

by Rainguard (required for

applications that need warranties

and substrate is unpainted or sealed)

For applications that do not require material and labor warranties,

and only need material warranties please refer to VANDLGUARD™

Non-Sacrificial Graffiti Coating.

For applications that do not require labor warranties, please refer

to VANDLGUARD™ Non-Sacrificial Graffiti Coating.

Summary of content (2 pages)

PAGE 1
VANDLGUARD ONE ™ Warranty Period: One Year NON-SACRIFICIAL ANTI-GRAFFITI COATING CSI Reference: Division 9 PRODUCT DESCRIPTION Part Numbers: 1 Gallon 5 Gallon VANDLGUARD ONE Non-Sacrificial Anti-Graffiti Coating is a single -coat product that provides a tough and durable graffiti-resistant finish. This is a cross-linking co-polymer material coating that dries clear (non-yellowing) with a low-luster sheen.
PAGE 2
HOW TO USE: GRAFFITI REMOVAL: All surfaces to be coated should be structurally sound, clean, and dry. In many instances, non-abrasive household cleaners safely and effectively remove tagging. However, in the event tagging can’t be removed with these cleaners, please contact manufacturer and purchase Rainguard VANDLCLEAN SUPER. Follow manufacturer’s recommendations and instructions for use. In addition, warm water power-washing has also been known to assist in the removal of tagging.