Operation Manual

11
MANUAL OPERATIONS (CONT.)
OTHER FEATURES
RUN A PROGRAM
To manually run a complete program once for the run times as set in the
automatic schedule turn the dial to the Run a Start position. “Prog 1”
will be shown in the display. To run program 1, leave or advance to
start 2 by pressing .
OTHER FEATURES
STOP
To stop an automatic or manual watering schedule, turn the dial to
the Off position.
TIP: For automatic watering, remember to turn the dial back to the
Auto Run position. The Off position will stop any watering from occuring.
STACKING START TIMES
Should you accidently set the same watering start time on more than one
program, the controller will stack them in sequential order from the lowest
number. All programmed start times will be watered, but the start times will
be shunted along.
AUTOMATIC BACK UP PROGRAM
When the battery is not fitted or is low, there is a backup default program
in program 1 watering every day at 12:00 a.m. for 10 minutes per station.
A standard 9 volt battery should be fitted to the battery snap supplied
to maintain the clock accuracy and hold the automatic programs
during power outs.
TIP: The display has a warning indicator to let you know when the battery
is low or not fitted. The word BAT is displayed under the AM / PM indicator
in the clock mode.