Operation Manual

7
PROGRAMMING
STEP 2. Set Watering Days
This unit has interval watering or individual day selection from every
day to every 15th day or a 365 day calendar with odd/even day
selection in areas where water restrictions require this feature.
Turn
the dial to Set Watering Days.
INTERVAL DAY SELECTION
THE DISPLAY WILL SHOW:
“Interval 1” will be flashing.
This means that watering will occur every day.
To change the interval day, press the button.
Examples: Interval 2 means watering will take place every second
day, 3 means watering will be every third day etc.
Interval watering can be set from everyday to every 15th day.
The Run Day refers to the number of days press the next watering
program will occur.
INDIVIDUAL DAY SELECTION
Press the button. This is the selectable day option.
THE DISPLAY WILL SHOW:
This refers to Mon being Day 1.
To turn Monday off, press button . To leave Monday active, leave
as is & advance to Tuesday (day 2) by pressing the button.
Again press the button to set the day off if required followed
by to advance. Continue until all seven days have been set
“on” or “off” .