Operation Manual

ManualsBrandsRAINBIRD ManualsToolsSUPER IMAGE SERIES

STA

CYC

• A circular menu. Repeatedly pressing the ey will return you to the initial display. It is adviseable to run through

the 8 displays in order to familiarize yourself with the screen sequence.

• During the programming, the data you enter is automatically stored when you move from one screen display to the next

by pressing

Icons help you program and indicate which part of the sequence is being programmed.

PROGRAMMING FEATURES

Select current time and day

Manual cycle start

Allow or prevent irrigation

Manual station start

Set water budget

Set the run times

Select water days

Select start times

RAIN BIRD SUPER IMAGE SERIES

Instruction Manual

Summary of content (4 pages)

PAGE 1
RAIN BIRD SUPER IMAGE SERIES Instruction Manual PROGRAMMING FEATURES • A circular menu. Repeatedly pressing the ey will return you to the initial display. It is adviseable to run through the 8 displays in order to familiarize yourself with the screen sequence. • During the programming, the data you enter is automatically stored when you move from one screen display to the next by pressing . Icons help you program and indicate which part of the sequence is being programmed.
PAGE 2
I. SET CLOCK Icon : clock A- Set the current time of day Press the key repeatedly until this display appears : Now use the ON and OFF keys. The time of day will appear in hours and minutes. The +/ON key increases the setting. Holding down the key will cause the numbers to increase more rapidly.The -/OFF key decreases the setting. Note : 2 blinking dots separate the hours from the minutes.
PAGE 3
IV. SET THE LENGTH OF WATERING TIME PER STATION Icon : hour-glass A Repeatedly press the key until this display appears : The station number appears at the left. To set the station watering time, use the +/ON and -/OFF keys. The duration is set in 1 minute increments from 0 minutes to 12 hours. Holding down the +/ON or -/OFF keys will speed up the setting. Each station must be assigned to a program. Use the A/B key to assign the station to program A or B.
PAGE 4
VII - MANUAL CYCLE START Icon : hand + CYC CYC Remember that a cycle consists of all stations operating in sequential order. Repeatedly press the key until this display appears : Use the A/B key to select the cycle you wish to start. Prog A You may select either the cycle in program A or B. The program you select appears in the upper lefthand corner of the display. To start the cycle press the ON key. The blinking sprinkler stream appears in the display.