User Manual

INTEGRATED CIRCUITS INC.-APR9600
http://www.aplusinc.com.tw Page / 17 Ver2 .1
14
ExtClk 26
External Clock: This clock can be
used instead of the internal clock
for greater programming control
and or accuracy. When using the
internal clock this pin should be tied
to system GND.
Same as Random
Access Mode.
Same as Random
Access Mode.
/ RE 27
Record Enable: this pin controls
whether the device is in write or
read mode. Logic level high is read.
Same as Random
Access Mode.
Same as Random
Access Mode.
VCCD 28
Digital Positive Power Supply: This
connection supplies power for
on-chip digital circuitry. Should be
connected to the positive supply
rail as outlined in the reference
schematics.
Same as Random
Access Mode.
Same as Random
Access Mode.
4. Electrical Characteristics :
The following tables list absolute maximum ratings, DC Characteristics, and Analog
Characteristics for the APR9600 device.
Table 4 Absolute Maximum Ratings
Item Symbol Condition Min Max Unit
Power Supply voltage VCC
TA = 25℃
-0.3 7.0 V
Input Voltage VIN IIN<20mA -1.0 Vcc + 1.0 V
Storage Temperature TSTG - -65 150
℃
Temperature Under Bias TBS - -65 125
℃
Lead Temperature TLD <10s -0.3 300
℃
Table 5 DC Characteristics
Item Symbol Condition Min Typ Max Unit
Power Supply voltage VCC
TA = 25℃
4.5 - 6.5 V
Input High Voltage VIN - 2.0 - V
Input Low Voltage VIL - - - 0.8 V
Output High Voltage VOH IOH=-1.6mA 2.4 - - V
Output Low Voltage VOL IOL=+4.0mA - - 0.45 V
Input Leakage Current VIH=Vcc - - - 1.0 uA
Input Leakage Current IIL VIL=Vss -1.0 uA
Output Tri-state Leakage Current IOZ
VOUT=Vcc or
VOUT=VSS
-1.0 1.0 uA
Operating Current Consumption ICC
Internal Clock No
Load
- 25 - mA
Standby Current Consumption ICCS No Load - 1.0 - uA
Table 6 Analog Characteristics*
Item Symbol Condition Min Typ Max Unit
Micln Input Voltage
VMI
30
mVP-P
Micln Input Resistance
RMI
15
kΩ
Micln Amp Gain (1)
GMI1 AGC=2.25V
30
dB
Micln Amp Gain (2)
GM2 AGC=3.8V
-2
dB
ANA_IN Input Voltage
VANI
140
mVP-P
ANA_IN Input Resistance
RANI
500
kΩ
ANA_IN Amp Gain
GANI ANA_IN to SP+/-
10
dB
AGC Output Resistance
RAGC
225
KΩ
Sp+/- Output Power
PSP
RSP+/-=16Ω
12.2
MW
Voltage Amplitude across SP+/-
VSP
RSP+/-≧16Ω
1.4
VP-P