User Manual

AT75C220
117
TC Status Register
Register Name:TC_SR
Access Type:Read-only
• COVFS: Counter Overflow Status
0 = No counter overflow has occurred since the last read of the Status Register.
1 = A counter overflow has occurred since the last read of the Status Register.
• LOVRS: Load Overrun Status
0 = Load overrun has not occurred since the last read of the Status Register or WAVE = 1.
1 = RA or RB have been loaded at least twice without any read of the corresponding register since the last read of the
Status Register if WAVE = 0.
• CPAS: RA Compare Status
0 = RA compare has not occurred since the last read of the Status Register or WAVE = 0.
1 = RA compare has occurred since the last read of the Status Register if WAVE = 1.
• CPBS: RB Compare Status
0 = RB compare has not occurred since the last read of the Status Register or WAVE = 0.
1 = RB compare has occurred since the last read of the Status Register if WAVE = 1.
• CPCS: RC Compare Status
0 = RC compare has not occurred since the last read of the Status Register.
1 = RC compare has occurred since the last read of the Status Register.
• LDRAS: RA Loading Status
0 = RA Load has not occurred since the last read of the Status Register or WAVE = 1.
1 = RA Load has occurred since the last read of the Status Register, if WAVE = 0.
• LDRBS: RB Loading Status
0 = RB load has not occurred since the last read of the Status Register or WAVE = 1.
1 = RB load has occurred since the last read of the Status Register if WAVE = 0.
• ETRGS: External Trigger Status
0 = External trigger has not occurred since the last read of the Status Register.
1 = External trigger has occurred since the last read of the Status Register.
• CLKSTA: Clock Enabling Status
0 = Clock is disabled.
1 = Clock is enabled.
• MTIOA: TIOA Mirror
0 = TIOA is low. If WAVE = 0, then TIOA pin is low. If WAVE = 1, then TIOA is driven low.
1 = TIOA is high. If WAVE = 0, then TIOA pin is high. If WAVE = 1, then TIOA is driven high.
• MTIOB: TIOB Mirror
0 = TIOB is low. If WAVE = 0, then TIOB pin is low. If WAVE = 1, then TIOB is driven low.
1 = TIOB is high. If WAVE = 0, then TIOB pin is high. If WAVE = 1, then TIOB is driven high.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
–––––MTIOB MTIOA CLKSTA
15 14 13 12 11 10 9 8
––––––––
76543210
ETRGS LDRBS LDRAS CPCS CPBS CPAS LOVRS COVFS