Manual

183
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
Figure 22-15. WRITE_MODE = 0. The write operation is controlled by NCS
22.8.5 Coding Timing Parameters
All timing parameters are defined for one chip select and are grouped together in one
SMC_REGISTER according to their type.
The SMC_SETUP register groups the definition of all setup parameters:
• NRD_SETUP, NCS_RD_SETUP, NWE_SETUP, NCS_WR_SETUP
The SMC_PULSE register groups the definition of all pulse parameters:
• NRD_PULSE, NCS_RD_PULSE, NWE_PULSE, NCS_WR_PULSE
The SMC_CYCLE register groups the definition of all cycle parameters:
• NRD_CYCLE, NWE_CYCLE
Table 22-4 shows how the timing parameters are coded and their permitted range.
MCK
D[31:0]
NCS
NWE,
NWR0, NWR1,
NWR2, NWR3
A
[25:2]
NBS0, NBS1,
NBS2, NBS3,
A0, A1
Table 22-4. Coding and Range of Timing Parameters
Coded Value Number of Bits Effective Value
Permitted Range
Coded Value Effective Value
setup [5:0] 6 128 x setup[5] + setup[4:0] 0 ≤ ≤ 31 128 ≤ ≤ 128+31
pulse [6:0] 7 256 x pulse[6] + pulse[5:0] 0 ≤ ≤ 63 256 ≤ ≤ 256+63
cycle [8:0] 9 256 x cycle[8:7] + cycle[6:0] 0 ≤ ≤ 127
256 ≤ ≤ 256+127
512 ≤ ≤ 512+127
768 ≤ ≤ 768+127