Manual

512
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
1 = If SVDIS = 0, the slave mode is enabled.
Note: Switching from Master to Slave mode is only permitted when TXCOMP = 1.
• SVDIS: TWI Slave Mode Disabled
0 = No effect.
1 = The slave mode is disabled. The shifter and holding characters (if it contains data) are transmitted in case of read oper-
ation. In write operation, the character being transferred must be completely received before disabling.
• SWRST: Software Reset
0 = No effect.
1 = Equivalent to a system reset.