Owner's manual

ManualsBrandsRainbow Electronics ManualsHardwareBU4070BF

Standard ICs

Quad exclusive OR gate

BU4030B / BU4030BF

BU4070B / BU4070BF

The BU4030B / F and BU4070B / F are exclusive OR gates.

Four circuits are contained on a single chip. An inverter-based buffer is added to the gate output for an enhanced I / O

voltage characteristic, and the load capacitance has been increased to minimize fluctuation in the propagation time.

In addition, these products feature low power consumption and a high noise margin.

These can also be used in digital comparators and parity circuit applications.

•

Truth table

•

Absolute maximum ratings (VSS = 0V, Ta = 25°C)

INPUT

OUTPUT

LLL

LHH

HLH

HHL

•

Block diagram

VSS

14 VDD

13 A4

12 B4

10 O3

8 A3

Parameter Symbol Limits Unit

Power supply voltage V

DD V

Power dissipation mW

Operating temperature – 40 ~ + 85 °C

Storage temperature – 55 ~ + 150 °C

Input voltage V

IN V

– 0.3 ~ + 18

– 0.3 ~ VDD + 0.3

1000 (DIP), 450 (SOP)Pd

Topr

Tstg

•

Features

1) Low power dissipation.

2) Wide range of operating power supply voltages.

3) High input impedance.

4) High fan-out.

5) Direct drive of 2 L-TTL inputs and 1 LS-TTL input.

Summary of content (4 pages)

PAGE 1
Standard ICs Quad exclusive OR gate BU4030B / BU4030BF BU4070B / BU4070BF The BU4030B / F and BU4070B / F are exclusive OR gates. Four circuits are contained on a single chip. An inverter-based buffer is added to the gate output for an enhanced I / O voltage characteristic, and the load capacitance has been increased to minimize fluctuation in the propagation time. In addition, these products feature low power consumption and a high noise margin.
PAGE 2
Standard ICs BU4030B / BU4030BF / BU4070B / BU4070BF characteristics •DCElectrical characteristics (unless otherwise noted, V SS Parameter Input high level voltage Input low level voltage Symbol VIH VIL = 0V, Ta = 25°C) Min. Typ. Max. Unit 3.5 — — 7.0 — — 11.0 — — 15 — — 1.5 5 — — 3.0 — — 4.0 VDD (V) Conditions Measurement circuit — Fig.1 — Fig.1 5 V V 10 10 15 Input high level current IIH — — 0.3 µA 15 VIH = 15V Fig.
PAGE 3
Standard ICs BU4030B / BU4030BF / BU4070B / BU4070BF Switching characteristics (unless otherwise noted, VSS = 0V, Ta = 25°C, CL = 50 pF) Parameter Symbol tTLH Output rise time Output fall time tTHL tPLH "L" to "H" propagation delay time tPHL "H" to "L" propagation delay time Input capacitance CI Min. Typ. Max. Unit.
PAGE 4
Standard ICs BU4030B / BU4030BF / BU4070B / BU4070BF •Electrical characteristic curve POWER DISSIPATION: Pd (mW) 1200 1000 DIP14 800 600 SOP14 400 200 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE: Ta (°C) Fig.3 Power dissipation vs. Ta •External dimensions (Units: mm) BA4030B / BU4070B BU4030BF / BU4070BF 19.4 ± 0.3 8.7 ± 0.2 8 3.2 ± 0.2 0.3 ± 0.1 2.54 0.5 ± 0.1 DIP14 4 8 1 7 1.27 0.15 ± 0.1 1.5 ± 0.1 7.62 14 4.4 ± 0.2 6.2 ± 0.3 7 0.51Min. 4.25 ± 0.3 1 0.11 6.5 ± 0.