Owner manual

GM862-QUAD / PY Software User Guide
1vv0300747 Rev. 3 - 10/07/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 64 of 96
51-55 (reserved, 5 combinations)
56-62 values specific to each SC, usage
based on mutual agreement between
the SME and the SC (7 combinations
available for each SC)
63 A GSM mobile station. The SC
converts the SM from the received TP-
Data-Coding-Scheme to any data
coding scheme supported by that MS
(e.g. the default).
64 Short Message Type 0
65 Replace Short Message Type 1
66 Replace Short Message Type 2
67 Replace Short Message Type 3
68 Replace Short Message Type 4
69 Replace Short Message Type 5
70 Replace Short Message Type 6
71 Replace Short Message Type 7
72..94 Reserved
95 Return Call Message
96..126 Reserved
127 SIM Data download
- Data coding Scheme as defined by GSM 3.38 – in numerical format
The DCS is an 8-bit parameter reported as an integer, the default value is 0, otherwise
for simplicity, we report only the most useful DCS, for further Schemes refer to GSM 3.38
b7 b6 b5 b4 b3 b2 b1 b0
1 1 1 1 0 Alpha
bet
Class
where
Alphabet
0 - default Alphabet
1 - 8 bit
Class
0 0 - Class 0
0 1 - Class 1
1 0 - Class 2
1 1 - Class 3
TIP: The default value for DCS = 0 represents the default SMS sent by a mobile. If you don't
need any particular data coding scheme use DCS=0.