Owner manual

GM862-QUAD / PY Software User Guide

1vv0300747 Rev. 3 - 10/07/07

2- Let's assume you have the IRA code 0x6B and you want to find the corresponding character:

From the table you find at the position

- most significant Nibble: 6

- least significant Nibble: B

Hence, the character corresponding to the 0x6B IRA code is 'k'.

TIP: With the command AT+CSCS is possible to select the character set; the available types

are:

“IRA” - ITU-T.50

”8859-1” - ISO 8859 Latin 1

”PCCP437” - PC character set Code Page 437.

”UCS2” - 16-bit universal multiple-octet coded character set (ISO/IEC10646)

Please refer to the AT Commands Reference Guide for the full command description

3.5.3 Writing a New SMS to storage

A new SMS can be written in the selected storage <memw> (in the current SW version only "SM" is

supported) and then can be sent to the desired destination.

To write the new SMS:

•

send command

AT+CMGW="<da>"<cr>

where:

<da>: destination address

• wait for prompt "

• send SMS text (MAX 160 characters)

• end command with CTRL-Z character (0x1A hexadecimal) or abort command with ESC character

(0x1B hexadecimal)

• wait for response:

Response Reason Action

+CMGW: <index>

Message has been successfully

written in position number

<index>

proceed ahead

ERROR some error occurred Enable the extended error

codes report (see par.2.5.2.1)

and retry.

+CMS ERROR: 330 SMSC address unknown Insert SMSC address (see par.

3.5.1.3)

+CMS ERROR: 322 Memory Full memory is full, hence delete

some records and retry.

NOTE: if command is aborted with ESC character, then only the OK result code is returned.