Owner manual

LM95010
Digital Temperature Sensor with SensorPath
Bus in
MSOP8 Package
General Description
The LM95010 is a digital output temperature sensor that has
single-wire interface compatible with National Semiconduc-
tor’s SensorPath interface. It uses a V
be
analog tempera-
ture sensing technique that generates a differential voltage
that is proportional to temperature. This voltage is digitized
using a Sigma-Delta analog-to-digital converter. The
LM95010 is part of a hardware monitor system, comprised of
two parts: the PC System Health Controller (Master), such
as a Super I/O, and up to seven slaves of which four can be
LM95010s. Using SensorPath, the LM95010 will be con-
trolled by the master and report to the master its own die
temperature. SensorPath data is pulse width encoded,
thereby allowing the LM95010 to be easily connected to
many general purpose micro-controllers.
Features
n SensorPath Bus
— 4 hardware programmable addresses
n Temperature Sensing
— 0.25 ˚C resolution
— 127.75 ˚C maximum temperature reading
n 8-lead MSOP package
Key Specifications
n Temperature Sensor Accuracy
±
2 ˚C (max)
n Temperature Range −20 ˚C to +125 ˚C
n Power Supply Voltage +3.0V to +3.6V
n Power Supply Current 0.5 mA (typ)
n Conversion Time 14 ms to 1456 ms
Applications
n Microprocessor based equipment
— (Motherboards, Base-stations, Routers, ATMs, Point
of Sale, …)
n Power Supplies
Block Diagram
20082001
SensorPath
is a trademark of National Semiconductor Corporation.
November 2003
LM95010 Digital Temperature Sensor with SensorPath Bus in MSOP8 Package
© 2003 National Semiconductor Corporation DS200820 www.national.com

Summary of content (19 pages)